Datasheet
G-63E3FS
E3FS
Safety Single Beam Sensor & Controller
E3FS series with
F3SP-U3P-TGR and F3SP-U5P-TGR
Features
The E3FS is a type 2 Safety Single beam sensor intended to be used with the control units F3SP-U3P -TGR and F3SP-U5P-TGR.
• Safety Single Beam (E3FS)
1) Up to Category 2 (EN954-1)
Type2 ESPE and Type2 AOPD.
Approved by TÜV Product Service
2) High protection against water
IP67 (IEC60529)
3) Small Sensor
M18 x 65 mm
4) 4 different model available
Plastic case (with cable type and connector type)
Brass case (with cable type and connector type)
• Muting Controller for Safety single beam sensor (F3SP-
U3P-TGR and F3SP-U5P-TGR)
1) Muting functions are integrated
Muting inputs
Override function
Muting Lamp output
Interlock function and Test Reset input
2) 2 different model available
2 beam unit (F3SP-U3P-TGR)
4 beam unit (F3SP-U5P-TGR)
3) Small Controller
2 beam unit W=22.5 mm
4 beam unit W=45.0 mm
F502-EN2-04.book Seite 63 Dienstag, 26. Juli 2005 5:48 17