Datasheet

ManualsBrandsOmron Industrial Automation ManualsAutomationNon-Contact Safety Switch, 2NC, IP69K, Cable, 10 m

Magnetic non-contact safety switches

F3S-TGR-N@R

Reed non-contact switches monitor the status of guarding doors. Stainless steel

housing for high hygiene demands in the food industry are available.

• Based on reed technology

• Connect up to 6 switches in series

• Operates with all Omron safety controllers

• Operates behind stainless steel fittings

• Non-contact – no abrasion – no particles

• Compensation of mechanical tolerances

• Suitable for high pressure cleaning, CIP/SIP

processes due IP69K (pre-wired types)

• Conforms to safety categories up PLe acc.

EN ISO13849-1

Model Number Structure

1. Type

L: Elongated Sensor

S: Small Sensor

M: Miniature Sensor

C: Compact Sensor

W: Wide Sensor

B: Barell Sensor

2. Housing Material

P: Plastic Housing

M: Stainless Steel Housing

H: Hygienic designed Stainless Steel Housing

F: Special Food Type Stainless Steel Housing

3. Contact configuration

11*: 1 Normally Closed Contact (NC) +

1 Normally Open Contact (NO)

20*: 2 Normally Closed Contacts (NC)

21: 2 Normally Closed Contacts (NC) +

1 Normally Open Contact (NO)

* only existing for some NMPR-types

4. Cable Length/connection

05: 5 m Cable

05-R*: 5 m Cable exit to the right

10: 10 m Cable

10-R*: 10 m Cable, exit to the right

M1J8: M12 male connector, 8 pin, fitted with 250 mm cable

M1J8-R*: M12 male connector, 8 pin, fitted with 250 mm cable

exit to the right

08-L10**: M8 male connector, 4 pin

08-R10**: M8 male connector, 4 pin, exit to the right

* only for F3S-TGR-NMPR and F3S-TGR-NMHR

** only for F3S-TGR-NMPR

F3S-TGR-N@@R-@@-@@

12 3

Summary of content (14 pages)

PAGE 1
Magnetic non-contact safety switches F3S-TGR-N@R Reed non-contact switches monitor the status of guarding doors. Stainless steel housing for high hygiene demands in the food industry are available.
PAGE 2
F3S-TGR-N@R Ordering Information Polyester Housing Type Elongated Sensors Small Sensors Cable connection 5 m pre-wired 10 m pre-wired Compact Sensors Wide Sensors F3S-TGR-NLPR-21-M1J8 5 m pre-wired 10 m pre-wired F3S-TGR-NSPR-21-05 F3S-TGR-NSPR-21-10 5 m pre-wired 10 m pre-wired M12, 8 pin, fitted with 250 mm cable 5 m pre-wired, cable exit right 10 m pre-wired, cable exit right M12, 8 pin, fitted with 250 mm cable exit right M8, 4 pin, direct connector left side M8, 4 pin, direct connector right si
PAGE 3
F3S-TGR-N@R Hygienic and food types Type Small Sensors Small Sensors (Special food types) Cable connection 5 m pre-wired 10 m pre-wired Contact configuration M12, 8 pin, fitted with 250 mm cable F3S-TGR-NSHR-21-M1J8 5 m pre-wired 10 m pre-wired F3S-TGR-NSFR-21-05 F3S-TGR-NSFR-21-10 M12, 8 pin, fitted with 250 mm cable Miniature Sensors Order code F3S-TGR-NSHR-21-05 F3S-TGR-NSHR-21-10 2NC/1NO 5 m pre-wired 10 m pre-wired M12, 8 pin, fitted with 250 mm cable 5 m pre-wired, cable exit right 10 m pr
PAGE 4
F3S-TGR-N@R Control units Order code G9SE G9SE-201 G9SE-401 G9SE-221-T05 G9SE-221-T30 G9SA G9SA-301 G9SA-501 G9SA-321-T075 G9SA-321-T15 G9SA-321-T30 Safety relay units G9SR G9SR-BC201-RC G9SR-AD201-RC G9SR-EX031-T90-RC G9SP-N G9SP-N10S G9SP-N10D G9SP-N20S Programmable standalone controllers NX-S Integrated safety/ Programmable standalone controller 4 NX-SL3300 NX-SL3500 NX-SIH400 NX-SID800 NX-SOH200 NX-SOD400
PAGE 5
F3S-TGR-N@R Specifications Mechanical data Indicator Operating distance Recommended setting gap Actuator approach speed Switching frequency Operating temperature Enclosure protection Cable material Mounting bolts Tightening torque for mounting bolts Shock resistance (IEC 68-2-27) Vibration resistance (IEC 68-2-6) Material – OFF  ON (Sao) ON  OFF (Sar) – Min. Max. Max.
PAGE 6
F3S-TGR-N@R Operating characteristics L -5 -4 -3 -2 -1 0 1 2 3 4 5 5 mm misalignment tolerance after setting Connection diagrams Cable version Pin No. Signal name red blue black white yellow green brown orange NC Channel 1 NC Channel 1 NC Channel 2 NC Channel 2 NO Channel Auxillary NO Channel Auxillary M1J8-Connector version (M12 male) Wire Pin No. Signal (Y92E-M12PURSH8S_M-L) (male side) 5 6 7 8 1 2 3 4 7 3 1 2 4 6 5 8 NC Channel 1 NC Channel 1 NC Channel 2 NC Channel 2 NO Channel Aux.
PAGE 7
F3S-TGR-N@R Dimensions Elongated Sensor (Sensor/Actuator) F3S-TGR-NLPR 88 88 78 78 3.50 25 25 18.50 7 4.50 13 13 3 3 Ø 5.20 F3S-TGR-NLMR 88 88 78 78 18.50 3.50 25 25 7 4.60 14 14 3 3 Ø 5.40 Small Sensor (Sensor/Actuator) F3S-TGR-NSPR 13 50 13 22 4.50 4.50 25.50 4.20 3 20.50 20.50 25.50 4.20 3 50 22 F3S-TGR-NSMR 13 50 13 22 4.50 4.50 4.20 3 21 25.50 21 25.50 4.20 3 50 22 F3S-TGR-NSHR 13 25.50 22 13 20.50 20.50 25.
PAGE 8
F3S-TGR-N@R F3S-TGR-NSFR 13 50 22 13 10 25.50 20.50 25.50 20.50 10 M4 × 10 mm Tapped hole 50 22 Miniature Sensor (Sensor/Actuator) F3S-TGR-NMPR TYPE : MPR (Left) 5 19 26 22 26 36 19 36 22 8.40 13 13 6 6 8.40 4.50 4.50 SWITCH ACTUATOR 26 19 19 36 26 5 36 M8 × 1mm F3S-TGR-NMPR (M8, 4pin connector) 6.50 22 22 8.40 6 4.50 Switch 6.20 13 13 6 8.40 4.50 Actuator F3S-TGR-NMHR TYPE : MMR-H (Left) 19 22 39 15 22 15 4.40 8 26 39 19 26 45 SWITCH 4.
PAGE 9
F3S-TGR-N@R Barrel Sensor (Sensor/Actuator) F3S-TGR-NBPR F3S-TGR-NBMR Compact Sensor (Sensor/Actuator) F3S-TGR-NCPR Wide Sensor (Sensor/Actuator) F3S-TGR-NWPR 9
PAGE 10
F3S-TGR-N@R Wiring examples (Single head connection up to category 4 acc. EN954-1) G9SE Single Sensor Application with G9SE-201 (up to Safety PLe acc. EN ISO 13849-1) +24 V GND Start T33 A1 F3S-TGR-N_R Actuator A2 T31 KM1 Feedbackloop Sensor G9SE-201 red blue black white green yellow KM2 T32 T11 T12 T21 T22 Auxiliary (NO) KM1 14 13 23 24 KM2 KM2 KM1 M +Us GND Series connection Application, up to 6 Sensors with G9SE-201 (up to Safety PLd acc.
PAGE 11
F3S-TGR-N@R G9SA Single Sensor Application with G9SA-301 (up to Safety PLe acc. EN ISO 13849-1) +24 V GND Start A1 F3S-TGR-N_R A2 T31 KM1 Actuator Feedbackloop Sensor G9SA-301 red blue black white yellow green KM2 T32 T11 T12 T21 T22 Auxiliary (NO) KM1 14 13 23 24 KM2 KM2 KM1 M +Us GND Series connection Application, up to 6 Sensors with G9SA-301 (up to Safety PLd acc.
PAGE 12
F3S-TGR-N@R G9SP Single Sensor Application with G9SP (up to Safety PLe acc. EN ISO 13849-1) +24 V GND V0 G0 F3S-TGR-N_R Actuator Sensor G9SP red blue black white yellow green Test 0 In 0 Test 1 In 1 Auxiliary (NO) Series connection Application, up to 6 Sensors with G9SP (up to Safety PLd acc.
PAGE 13
F3S-TGR-N@R Safety Precautions !WARNING Be sure to turn OFF the power before performing wiring. Do not touch charge parts (e.g., terminals) while power is ON. Doing so may result in electric shock. Do not allow the actuator to come close to the switch with the door open. Doing so may cause machinery to start operating and may result in injury. Guard Stops !CAUTION Use guard stops in the way shown below to ensure that the switch and actuator do not make contact when the guard door is closed.
PAGE 14
F3S-TGR-N@R ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. E18E-EN-04 14 In the interest of product improvement, specifications are subject to change without notice.