Datasheet

F3S-TGR-N@C
5
Specifications
Mechanical data
Electrical data
Reliability data
Approved standards
Plastic housing Stainless steel housing
Indicator – LED
Operating distance
OFF  ON (Sao)
8 mm: NMPC, NBPC
10 mm: NLPC, NSPC
8 mm: NMHC, NBMC
10 mm: NLMC, NSMC, NSHC, NSFC
ON  OFF (Sar)
12 mm: NMPC, NBPC
20 mm: NLPC, NSPC
12 mm: NMHC, NBMC
20 mm: NLMC, NSMC, NSHC, NSFC
Recommended setting gap – 5mm
Actuator approach speed
Min. 4 mm/s
Max. 1,000 mm/s
Switching frequency Max. 1Hz
Operating temperature – –25 to 80°C –25 to 105°C
Enclosure protection
Flying lead IP69K
M12 connector IP67
Cable material
Flying lead PVC, 8 core, Ø 6 mm o.d.
M12 connector 250 mm, PVC, Ø 6 mm o.d.
Mounting bolts – 2 × M4
Tightening torque for
mounting bolts
Max. 1 Nm
Shock resistance
(IEC 68-2-27)
– 11 ms, 30 g
Vibration resistance
(IEC 68-2-6)
– 10 to 55 Hz, 1 mm
Material – Black polyester Stainless steel 316
Plastic housing Stainless steel housing
Sensor technology – Hall
Serial switching – up to 20 pcs. in series
Power supply – 24 VDC ±10%
Rated loads
NC contacts Max. 0.2 A @ 24 VDC
NO contact Max. 0.2 A @ 24 VDC
Dielectric withstand – 250 VAC
Insulation resistance – 100 M
Switching current Min. 1 mA, 10 VDC
Plastic housing Stainless steel housing
EN ISO 13849-1 up to PLe depending upon system architecture
EN 62061 up to SIL3 depending upon system architecture
PFHd 2.52 × 10
-8
Proof test interval (Life) 47 years
MTTFd (@ nop: 8 cycles per hour) 470 years
EN standards certified by TÜV Rheinland
EN ISO13849-1
EN 60204-1
EN ISO 14119
EN/IEC 60947-5-3
UL 508, CSA C22.2
BS 5304
EN 1088 conformance