Datasheet

ManualsBrandsOmron Industrial Automation ManualsAutomationNon-Contact Safety Switch, 2NC + 1NO, IP69K, Cable, 2 m

Hall Coded Non-contact Safety Switches

F3S-TGR-N@C

Hall coded non-contact switches monitor the status of guarding doors.

Stainless steel housing for high hygiene demands in the food industry are available.

• Based on hall technology

• Connect up to 20 switches in series

• LED supports easy diagnosis

• Operates with all OMRON safety controllers

• Operates behind stainless steel fittings

• Non-contact – no abrasion – no particles

• Compensation of mechanical tolerances

• Suitable for high pressure cleaning, CIP/SIP

processes due IP69K (pre-wired types)

• Conforms to safety categories up PLe acc.

EN ISO13849-1

Model Number Structure

1. Type

L: Elongated Sensor

S: Small Sensor

M: Miniature Sensor

B: Barell Sensor

2. Housing Material

P: Plastic Housing

M: Stainless Steel Housing

H: Hygienic designed Stainless Steel Housing

F: Special Food Type Stainless Steel Housing

3. Cable Length/connection

05: 5 m Cable

05-R*: 5 m Cable exit to the right

10: 10 m Cable

10-R*: 10 m Cable, exit to the right

M1J8: M12 male connector, 8 pin, fitted with 250 mm cable

M1J8-R*: M12 male connector, 8 pin, fitted with 250 mm cable

exit to the right

* only for F3S-TGR-NMPC and F3S-TGR-NMHC

F3S-TGR-N@@C-21-@@

Summary of content (14 pages)

PAGE 1
Hall Coded Non-contact Safety Switches F3S-TGR-N@C Hall coded non-contact switches monitor the status of guarding doors. Stainless steel housing for high hygiene demands in the food industry are available.
PAGE 2
F3S-TGR-N@C Ordering Information Polyester Housing Type Elongated Sensors Small Sensors Miniature Sensors Barrel Sensors Cable connection 5 m pre-wired 10 m pre-wired Contact configuration Order code F3S-TGR-NLPC-21-05 F3S-TGR-NLPC-21-10 M12, 8 pin, fitted with 250 mm cable F3S-TGR-NLPC-21-M1J8 5 m pre-wired 10 m pre-wired F3S-TGR-NSPC-21-05 F3S-TGR-NSPC-21-10 M12, 8 pin, fitted with 250 mm cable F3S-TGR-NSPC-21-M1J8 5 m pre-wired 10 m pre-wired M12, 8 pin, fitted with 250 mm cable 5 m pre-wire
PAGE 3
F3S-TGR-N@C Accessories Cables 8-pin T-connector connection cable Actuators Mounting screws 2m 5m 10 m 25 m M12 T-connector for M12 connector - types 0.6 m, M12-8pin 2 m, M12-8pin 5 m, M12-8pin 10 m, M12-8pin for F3S-TGR-NLPC for F3S-TGR-NSPC for F3S-TGR-NMPC for F3S-TGR-NCPC for F3S-TGR-NWPC for F3S-TGR-NBPC for F3S-TGR-NLMC for F3S-TGR-NSMC for F3S-TGR-NBMC for F3S-TGR-NSHC for F3S-TGR-NSFC for F3S-TGR-NMHC Set of Torx safety screws (M4, 4 × 30 mm, 4 × 20 mm, 4 × 10 mm; incl.
PAGE 4
F3S-TGR-N@C Control units Order code G9SA G9SA-301 G9SA-501 G9SA-321-T075 G9SA-321-T15 G9SA-321-T30 G9SB G9SB-2002-C G9SB-2002-A G9SB-200-B G9SB-200-D G9SB-3012-A G9SB-301-B G9SB-3012-C G9SB-301-D Safety relay units G9SX G9SX-BC202-R_ G9SX-AD322-T15-R_ G9SX-AD322-T150-R_ G9SX-ADA222-T15-R_ G9SX-ADA222-T150-R_ G9SP-N G9SP-N10S G9SP-N10D G9SP-N20S Programmable standalone controllers NE1A Programmable network controllers 4 NE1A-SCPU01-V1
PAGE 5
F3S-TGR-N@C Specifications Mechanical data Indicator – Min. Max. Max. – Flying lead M12 connector Flying lead M12 connector – Plastic housing LED 8 mm: NMPC, NBPC 10 mm: NLPC, NSPC 12 mm: NMPC, NBPC 20 mm: NLPC, NSPC 5 mm 4 mm/s 1,000 mm/s 1 Hz –25 to 80°C IP69K IP67 PVC, 8 core, Ø 6 mm o.d. 250 mm, PVC, Ø 6 mm o.d. 2 × M4 Max. 1 Nm – 11 ms, 30 g – 10 to 55 Hz, 1 mm – Black polyester Stainless steel 316 Plastic housing Hall up to 20 pcs. in series 24 VDC ±10% 0.2 A @ 24 VDC 0.
PAGE 6
F3S-TGR-N@C Operating characteristics L -5 -4 -3 -2 -1 0 1 2 3 4 5 5 mm misalignment tolerance after setting Connection diagram Cable version Pin No. red blue black white yellow green brown orange Signal name +24 VDC GND NC Channel 1/+ NC Channel 1/– NC Channel 2/+ NC Channel 2/– Aux. NO Channel/+ Aux. NO Channel/– M1J8-Connector version (M12 male) Pin No. (male side) 5 6 7 8 1 2 3 4 7 3 1 2 4 6 5 8 Signal +24 VDC GND NC Channel 1/+ NC Channel 1/– NC Channel 2/+ NC Channel 2/– Aux.
PAGE 7
F3S-TGR-N@C Dimensions Elongated Sensor (Sensor/Actuator) F3S-TGR-NLPC 88 88 78 78 18.50 25 3.50 25 7 4.50 13 13 3 3 Ø 5.20 F3S-TGR-NLMC 88 88 78 78 18.50 3.50 25 25 7 4.60 14 14 3 3 Ø 5.40 Small Sensor (Sensor/Actuator) F3S-TGR-NSPC 13 50 13 22 4.50 4.50 25.50 4.20 3 20.50 20.50 25.50 4.20 3 50 22 F3S-TGR-NSMC 13 50 13 22 4.50 4.50 4.20 3 20.5 25.50 21 25.50 4.20 3 50 22 F3S-TGR-NSHC 13 13 20.50 22 25.50 20.50 25.
PAGE 8
F3S-TGR-N@C F3S-TGR-NSFC 13 50 22 13 10 25.50 20.50 20.50 25.50 10 M4 × 10 mm Tapped hole 50 22 Miniature Sensor (Sensor/Actuator, left side version) F3S-TGR-NMPC 36 26 26 19 36 19 5 22 22 Ø 8.40 Ø 4.50 13 13 6 6 Ø 8.40 Ø 4.50 F3S-TGR-NMHC 39 39 26 26 19 19 6 22 Ø 4.40 Barrel Sensor (Sensor/Actuator) F3S-TGR-NBPC F3S-TGR-NBMC 8 15 15 22 Ø 4.
PAGE 9
F3S-TGR-N@C Wiring examples (Single head connection up to category 4 acc. EN954-1) G9SB Single Sensor Application with G9SB-2002-C (up to Safety PLe acc. EN ISO 13849-1) +24 V GND Start A1 A2 T31 F3S-TGR-N_C Actuator KM1 Sensor red blue black white yellow green brown orange Feedbackloop G9SB-2002-C KM2 T32 T11 T12 T22 T21 Auxiliary (NO) KM1 13 14 23 24 KM2 KM2 KM1 M +Us GND Series connection Application, up to 20 Sensors with G9SB-2002-C (up to Safety PLd acc.
PAGE 10
F3S-TGR-N@C G9SA Single Sensor Application with G9SA-301 (up to Safety PLe acc. EN ISO 13849-1) +24 V GND Start A1 A2 T31 F3S-TGR-N_C Actuator KM1 Feedbackloop Sensor red blue black white green yellow brown orange G9SA-301 KM2 T32 T11 T12 T22 T21 Auxiliary (NO) KM1 13 14 33 34 KM2 KM2 KM1 M +Us GND Series connection Application, up to 20 Sensors with G9SA-301 (up to Safety PLd acc.
PAGE 11
F3S-TGR-N@C G9SP Single Sensor Application with G9SP (up to Safety PLe acc. EN ISO 13849-1) +24 V GND V0 G0 F3S-TGR-N_C Actuator Sensor red blue black white yellow green brown orange G9SP Test 0 In 0 Test 1 In 1 Auxiliary (NO) Series connection Application, up to 20 Sensors with G9SP (up to Safety PLd acc.
PAGE 12
F3S-TGR-N@C T-Connector and Connection Cable Series connection with 2 or 3 Sensors for example with G9SA-301 (up to Safety PLd acc. EN ISO 13849-1) +24 V F3S-TGR-N_C-M1J8 Actuator GND brown Sensor Start green A1 A2 T31 KM1 Y92E-M12FSM12MSPURSH8_M-L Length: 0.6 m, 2 m, 5 m or 10 m F39-TGR-NT Feedbackloop G9SA-301 blue white yellow pink KM2 T32 T11 T12 T22 T21 KM1 13 Y92E-M12FSM12MSPURSH8_M-L Length: 0.
PAGE 13
F3S-TGR-N@C Safety Precautions !WARNING Be sure to turn OFF the power before performing wiring. Do not touch charge parts (e.g., terminals) while power is ON. Doing so may result in electric shock. Do not allow the actuator to come close to the switch with the door open. Doing so may cause machinery to start operating and may result in injury. Guard Stops !CAUTION Use guard stops in the way shown below to ensure that the switch and actuator do not make contact when the guard door is closed.
PAGE 14
F3S-TGR-N@C ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. E14E-EN-06 14 In the interest of product improvement, specifications are subject to change without notice.