Datasheet

F3S-TGR-CL@
4
Ordering information Accessories
Receiver Cables (M12-8pin, shielded, flying leads)
Transmitter Cables (M12-4pin, shielded, flying leads)
Mounting brackets
Master-Slave Accessories
Laser alignment kit
Specifications
Multi-beam safety sensors
Shape Description Order code Remark
Sensor connector with open cable
end M12-8pin, outer shielding
layer
Y92E-M12PURSH8S2M-L Receiver cable, 2 m length
Y92E-M12PURSH8S5M-L Receiver cable, 5 m length
Y92E-M12PURSH8S10M-L Receiver cable, 10 m length
Y92E-M12PURSH8S25M-L Receiver cable, 25 m length
Shape Description Order code Remark
Sensor connector with open cable
end M12-4pin, outer shielding
layer
Y92E-M12PURSH4S2M-L Transmitter cable, 2 m length
Y92E-M12PURSH4S5M-L Transmitter cable, 5 m length
Y92E-M12PURSH4S10M-L Transmitter cable, 10 m length
Y92E-M12PURSH4S25M-L Transmitter cable, 25 m length
Shape Description Order code Remark
Mounting bracket F39-TGR-ST-SB
*1
*1
Brackets amount included in shipment is shown in table of Dimensions
Mounting bracket × 1,
SLC mounting screws × 1 set
Adjustable bracket F39-TGR-ST-ADJ
Adjustable bracket × 1,
Bracket mounting screws × 1 set
Shape Description Order code Remark
Male-male extension connector
M12-8pin, outer shielding layer
Y92E-M12MSM12MSPURSH80.3M-L Connection cable, 0.3 m length
Y92E-M12MSM12MSPURSH80.9M-L
(included in slave system)
Connection cable, 0.9 m length
Alignment kit – end cap
F39-TGR-CL-MSA
(included in slave system)
To support alignment of a
Master-Slave system
Shape Description Order code Remark
Laser alignment kit F39-TGR-CL-LLK
Scanning range:  60 m
Batteries: 2 × 1.5 V Micro/AAA
Laser Class 2 (IEC 60825)
Item F3S-TGR-CL2_-0__ F3S-TGR-CL4_-0__
Sensor type Type 2 Type 4
Protective height 500 mm, 800 mm, 900 mm or 1,200 mm
Operating range:
F3S-TGR-CL__-K_ 0.5 to 20 m or 20 to 40 m (Dip switch option)
F3S-TGR-CL__-K_-___-LD 25 to 50 m
F3S-TGR-CL__-K2C-500 0.5 to 12 m
F3S-TGR-CL__-K3C-800 0.5 to 8 m
F3S-TGR-CL__-K4C-____ 0.5 to 7 m
Beam pitch
F3S-TGR-CL__-K2_-500: 2 beams, 500 mm
F3S-TGR-CL__-K3_-800: 3 beams, 400 mm
F3S-TGR-CL__-K4_-900: 4 beams, 300 mm
F3S-TGR-CL__-K4_-1200: 4 beams, 400 mm
Effective aperture angle (EAA)
Within ±5° Within ±2.5°
for the emitter and receiver at a detection distance of at least 3 m according to IEC 61496-2
Light source Infrared LED (880 nm), power dissipation <3 mW, Class 1 per EN 60825-1
Supply voltage 24 VDC ±20%, according EN 60204-1 able to cover a drop of voltage of at least 20 ms
OSSD 2 PNP transistor outputs, load current 2 × 250 mA max
Test functions Self test (after power ON and during operation)
8°
8°