Brochure

With integrated LEDs for alignment, muting and override on
every curtain, set-up really could not be simpler. T-, L- and
X-shape muting can be selected, depending on the
application, so that products on conveyors can be safely
moved in and out of dangerous areas. All muting actuators
perfectly fit our F3S-TGR-CL safety sensor range. T-, L- and
X-shape is available in active-active for long range and active-
passive for short range applications. The integrated muting
lamp shows when the muting facility is activated, so that
safety is neither compromised – nor complicated.
T-Shape muting: Bi-directional muting allows reliable
detection of boxes passing into and out of the danger-zone.
Boxes don’t need to be aligned on the conveyor so there are
no timing restrictions.
L-Shape muting: When materials exit the danger zone, two
sensors enable the muting function. Installation time is
reduced, and there are no time constraints when boxes are not
aligned on the belt.
X-Shape muting: If pallets are not evenly packed, or if there
are small gaps between the products – for example, on pallets
loaded with bottles - time-controlled X-shaped muting will
maintain safety without complex installation requirements.
Integrated muting lamp: The muting lamp is installed close to
the muted section to indicate when muting has been
activated, warning operators against entering the danger zone.
The integrated lamp means installation is straightforward,
while LED technology ensures a long working life.
Mute to suit your application