Brochure

ManualsBrandsOmron Industrial Automation ManualsOptical SensorsSafety Light Curtain 14m 2 x PNP

F3S-TGR-CL Safety sensors

Specifications

Multi-beam safety sensors

Finger- and hand safety protection sensors

Item F3S-TGR-CL2_-0__ F3S-TGR-CL4_-0__

Sensor type Type 2 Type 4

Protective height 500 mm, 800 mm, 900 mm or 1,200 mm

Operating range F3S-TGR-CL__-K_ 0.5 to 20 m or 20 to 40 m (Dip switch option)

F3S-TGR-CL__-K_-___-LD 25 to 50 m

F3S-TGR-CL__-K2C-500 0.5 to 12 m

F3S-TGR-CL__-K3C-800 0.5 to 8 m

F3S-TGR-CL__-K4C-____ 0.5 to 7 m

Beam pitch F3S-TGR-CL__-K2_-500: 2 beams, 500 mm

F3S-TGR-CL__-K3_-800: 3 beams, 400 mm

F3S-TGR-CL__-K4_-900: 4 beams, 300 mm

F3S-TGR-CL__-K4_-1200: 4 beams, 400 mm

Effective aperture angle (EAA) Within ±5° Within ±2.5°

for the emitter and receiver at a detection distance of at least 3 m according to IEC 61496-2

Light source Infrared LED (880 nm), power dissipation <3 mW, Class 1 per EN 60825-1

Supply voltage 24 VDC±20%, according EN 60204-1 able to cover a drop of voltage of at least 20 ms

OSSD 2 PNP transistor outputs, load current 2 × 250 mA max

Test functions Self test (after power ON and during operation)

Safety-related functions All models with dip-switch setup for external device monitoring, interlock function, range setting (short and long range) and optical or wired sync.

Advanced models with selectable pre-reset function, T-, L-or X- muting function (timeout or infinite muting dip switch option) and muting lamp

integrated (only for the non master-slave systems)

Response time ON to OFF: Maximum: 13 ms

Ambient temperature Operating: –10 to 55°C, Storage: –25 to 70°C (no icing, no condensation)

Ambient humidity 95% not condensing

Degree of protection IP 65 (IEC 60529)

Materials Housing: Painted aluminum, Yellow, RAL 1018

Front Window: Acrylic Lexan

Red end cap: PA6 (Standalone models),

Transparent end cap: PC (Advanced standalone models),

Sealing Gasket: EPDM

Mounting Bracket: Cold rolled Steel

Suitable for safety control systems PLc (ISO 13849-1) PLe (ISO 13849-1)

Category Categorie 2 Categorie 4

PFHd 2.5 × 10

-9

Proof test interval every 20 years

Item F3S-TGR-CL2_-0__ F3S-TGR-CL4_-0__

Sensor type Type 2 Type 4

Protective height 150 mm to 2,400 mm

Operating range

(short setting or long setting)

F3S-TGR-CL__-014: 0.2 m to 3 m or 3 m to 6 m (Dip switch option)

F3S-TGR-CL__-035: 0.2 m to 7 m or 7 m to 14 m (Dip switch option)

F3S-TGR-CL__-070: 0,2 m to 7 m or 7 m to 14 m (Dip switch option)

Detection capability F3S-TGR-CL__-014: Opaque objects 14 mm in diameter

F3S-TGR-CL__-035: Opaque objects 35 mm in diameter

F3S-TGR-CL__-070: Opaque objects 70 mm in diameter