Datasheet

97
Reflective Photomicrosensor with Sensitivity Adjuster (Non-modulated)
EE-SY671/672
Photomicrosensor with sensitivity adjuster.
• Easy adjustment with a built-in sensitivity adjuster.
• Easy optical axis monitoring with a bright light indicator.
• Compact design incorporating a built-in amplifier and special IC
enables direct switching capacity of up to 100 mA.
• Wide operating voltage range: 5 to 24 VDC
•
Connection possible with a range of ICs, relays, and Programmable
Controllers (PLCs).
Be sure to read Safety Precautions on
page 100.
Ordering Information
Sensors
* The Dark-ON/Light-ON (selectable) models are normally used as dark-ON models. To use them as light-ON models, short-circuit the L terminal and positive (+)
terminal.
An EE-1001-1 Connector with the terminals already short-circuited is also available.
Accessories (Order Separately)
* Refer to Accessories for details.
Appearance Sensing method Sensing distance Output type
Output
configuration
Model
Horizontal
type
Reflective type NPN output
Dark-ON or Light-ON
(Selectable) *
EE-SY671
Vertical type EE-SY672
Infrared li
g
ht
1 to 5 mm
Type Cable length Model Remarks
Connector EE-1001
EE-1001-1
L terminal and positive (+) terminal are already
short-circuited.
EE-1009
Connector with Cable
1 m
EE-1006
EE-1010
2 m
EE-1006
EE-1010
Connector with Robot Cable
1 m EE-1010-R
2 m EE-1010-R