Datasheet
121
Ratings and Specifications
*1. The Connector has a built-in locking mechanism. To remove the Connector from the Sensor, grip the top and bottom of the Connector
housing, as shown in the following diagram, and then pull out the Connector.
*2. EE-SX67@ and EE-SY67@ are the best used in the light-ON state.
Product Connector *1
Connector with
Cable *1
Connector with
Robot Cable *1
Connector
Connector
(short-circuit-
ed between
positive (+) and
L terminals) *2
Connector with
Cable
Model EE-1009 EE-1010 EE-1010-R EE-1001 EE-1001-1 EE-1006
Item
Appearance
Contact resistance 20 mΩ max. (at 20 mV max., 100 mA max.) 15 mΩ max. (at 100 VDC max.)
10 mΩ max.
(100 VDC max.)
Insertion/removal
durability
50 times min. ---
Insertion strength No. of poles ✕ 6 N max. 50 N max.
Surplus strength
(housing holding strength)
No. of poles ✕ 0.4 N max. --- 20 N max.
Standard cable length --- 2 m --- 2 m
Lock strength No. of poles ✕ 29 N min. ---
Ambient humidity −10 to +60°C −10 to +75°C −10 to 60°C
Material
Housing Polybutylene phthalate (PBT)
Contact Phosphor bronze (solder plating)
Applicable
Photomicrosensors
EE-SX67
@
(A,P,R) (Connector Models only), EE-SX47
@
, EE-SY67
@
, EE-SPY31
@
/41
@
, EE-SPX303N/403N,
EE-SPW311/411
Product Connector
Connector
with Cable
Connector
with Cable
Connector
with Cable
Connector
with Robot
Cable
Connector with Robot Cable
Model EE-1002 EE-1003 EE-1013 EE-1017 EE-1017-R EE-1016-R EE-1016-R-1
Item
Appearance
Contact resistance
10 mΩ max.
(at 10 mADC
and 1 ADC)
20 mΩ max. (at minute current
of 1 kHz and 500 VDC)
25 mΩ max. (at 10 mA DC and 20 mV max.)
Insertion strength 20 N max. 23.5 N max. 40 N max. 20 N max.
Surplus strength
(housing holding
strength)
15 N min.
(initial)
10 N min. (ten
times)
3.5 N min. 10 N min. 1.5 N min. 15 N min.
Cable length --- 1 m 1 m, 3 m 2 m
Ambient humidity −10 to +75°C −10 to +60°C −10 to +55°C −10 to +60°C −25 to +85°C
Material
Housing Nylon
Contact Phosphor bronze (solder plating)
Applicable
Photomicrosensors
EE-SPX301/401, EE-SPY30
@
/
40
@
, EE-SPZ301
@
/401
@
EE-SPX74@/
84@
EE-SX97
@
C1, EE-SX97
@
P-C1
EE-SX91
@
-C1J-R
(Pre-wired
Connector)
EE-SX67
@
-C1J-R
(Pre-wired
Connector)
Sensor
Connector










