Datasheet

120
Accessories (Order Separately)
Ordering Information
Connectors and Connector Hold-down Clips
*1. EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the
Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism
prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.
*2. The case (housing) and dispersion pins (for hand-crimping) for EE-1006 Connectors can be ordered separately. Use the EE-1006T Special
Crimping Tool to prepare the Connector.
Applicable Sensor models
EE-SX67@ (A, P, R), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411
Type Cable length Model Remarks
Connector
EE-1001
EE-1001-1 L terminal and positive (+) terminal are already short-circuited.
EE-1009 *1
Connector with
Cable
1 m
EE-1006 4 conductors
EE-1010 *1
2 m
EE-1006 4 conductors
EE-1006D 3 conductors
EE-1006L 2 conductors
EE-1010 *1
Connector with
Robot Cable
1 m EE-1010-R *1
2 m EE-1010-R *1
NPN/PNP Conversion
Connector
0.46 m
(total length)
EE-2002
Connector Hold-down Clip EE-1006A For EE-1006, EE-SX670 @ , 470, EE-SY671, and 672 only.
Connector Parts
*2
Case (housing) EE-1006H 100 per carton
Dispersion Pins EE-1006C 500 per carton
Special Crimping Tool EE-1006T
Applicable Sensor models
EE-SX97@-C1, EE-SX97@P-C1
Item Cable length Model Remarks
Connector with Cable
1 m EE-1017 1M
3 m EE-1017 3M
Connector with Robot Cable
1 m EE-1017-R 1M
3 m EE-1017-R 3M
Applicable Sensor models
EE-SX91@@-C1J-R (Pre-wired Connector)
Item Cable length Model Remarks
Connector with Cable 2 m EE-1016-R The robot cable is standard for all models.
Applicable Sensor models
EE-SX67@@-C1J-R (Pre-wired Connector)
Item Cable length Model Remarks
Connector with Cable 2 m EE-1016-R-1 The robot cable is standard for all models.
Applicable Sensor models
EE-SPX74@/84@
Item Cable length Model Remarks
Connector with Cable 1 m EE-1013
Applicable Sensor models
EE-SPX301/401, EE-SPY30@/40@, EE-SPZ301@/401@
Item Cable length Model Remarks
Connector EE-1002
Connector with Cable 1 m EE-1003
NPN/PNP Conversion
Connector
0.46 m
(total length)
EE-2001
Connector Hold-down Clip EE-1003A For EE-1003 only.
Handle
Ratchet
Crimping section
Switching knob
Appearance
Sensor
Connector