Datasheet

EE-SX95
3
Ratings and Specifications
*1. The differential travel is the value when a sensing object is moved in a lateral direction to the slot.
*2. The response frequency was measured by detecting the following rotating disk.
Item
Type Standard L-shaped F-shaped R-shaped U-shaped
NPN output Pre-wired EE-SX950-@ EE-SX951-@ EE-SX952-@ EE-SX953-@ EE-SX954-@
PNP output Pre-wired EE-SX950P-@ EE-SX951P-@ EE-SX952P-@ EE-SX953P-@ EE-SX954P-@
Sensing distance 5 mm (slot width)
Standard sensing object Opaque: 1.8 × 0.8 mm min.
Differential travel 0.025 mm max. *1
Light source (wave length) Infrared LED (940 nm)
Indicator Light indicator (red LED)
Power supply voltage 5 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption 15 mA max.
Control output
Load power supply voltage: 5 to 24 VDC
Load current: 50 mA max.
OFF current: 0.5 mA max.
50 mA load current with a residual voltage of 0.7 V max.
5 mA load current with a residual voltage of 0.4 V max.
Protection circuit Load short-circuit protection
Response frequency 1 kHz min. (3 kHz average) *2
Ambient illumination 1,000 lx max. with fluorescent light on the surface of the receiver
Ambient temperature range
Operating: −25 to 55°C
Storage: −30 to 80°C (with no icing or condensation)
Ambient humidity range
Operating: 5% to 85%
Storage: 5% to 95% (with no icing or condensation)
Vibration resistance (destruction)
10 to 2,000 Hz (peak acceleration: 150m/s
2
)
with a 0.75-mm single amplitude for 2.5 h (15-min periods, 10 cycles) each in X, Y, and Z directions
Shock resistance (destruction) 500 m/s
2
for 3 times each in X, Y, and Z directions
Degree of protection IEC60529 IP50
Connection method Pre-wired (standard length: 1 m)
Weight
(packed state)
Pre-wired Approx. 15 g
Materials
Case/cover
Polybutylene terephthalate (PBT)
Emitter/re-
ceiver
Polycarbonate (PC)
Disk
1 mm1 mm
2.1 mm
t = 0.2 mm