Datasheet

ManualsBrandsOmron Industrial Automation ManualsOptical SensorsThrough-Beam Photomicrosensor, 5mm, NPN, 50mA

Ultra-compact Pre-wired Photomicrosensor (Non-modulated)

EE-SX95

Meeting Customer Needs with Ultra-

compact Sensors that Mount with M3

Screws

• Mount using M3 or M2 screws.

• Reliable sensing slot depth of 6.5 mm.

• Indication of sensing window for easy confirmation of insertion depth.

• Bright indicator for confirmation from many directions.

• Both light-ON and dark-ON outputs provided.

• All models available with either standard cable or flexible robot cable.

• Load short-circuit protection circuit provided.

Refer to the Safety Precautions on

page 5.

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Features

Mount Using M2 or M3 Screws

The EE-SX95 can be mounted using M2 or M3 screws, so it can

easily replace an existing Sensor mounted with M2 screws.

Indication of Sensing Window for Easy

Confirmation of Insertion Depth

The location of the sensing window is indicated on the insertion slot

so that you can visually confirm whether the sensing object covers the

sensing window and easily check the insertion depth.

Reliable Best-in-Class Sensing Slot

Depth of 6.5 mm

(Based on April 2013 OMRON investigation.)

A deeper slot helps prevent the sensing object from coming into

contact with the base of the slot, creating greater tolerance in

mechanism design.

Bright Indicator for Confirmation from Many

Directions

The bright light indicator can be checked from up to four directions to

enable flexible selection of the installation location.

Example for the EE-SX950-W

Installation with M2 screws: 18.0

Installation with M3 screws: 18.7

The sensing object just needs

to extend below this line.

6.5mm

Summary of content (8 pages)

PAGE 1
Ultra-compact Pre-wired Photomicrosensor (Non-modulated) EE-SX95 Meeting Customer Needs with Ultracompact Sensors that Mount with M3 Screws • Mount using M3 or M2 screws. • Reliable sensing slot depth of 6.5 mm. • Indication of sensing window for easy confirmation of insertion depth. • Bright indicator for confirmation from many directions. • Both light-ON and dark-ON outputs provided. • All models available with either standard cable or flexible robot cable.
PAGE 2
EE-SX95 Ordering Information Sensors Infrared light Sensing method Appearance Sensing distance Output configuration Connection method (Cable length) Standard Output type Model NPN EE-SX950-W 1M *1 PNP EE-SX950P-W 1M *2 NPN EE-SX950-R 1M *1 NPN EE-SX951-W 1M *1 PNP EE-SX951P-W 1M *2 NPN EE-SX951-R 1M *1 NPN EE-SX952-W 1M *1 PNP EE-SX952P-W 1M *2 NPN EE-SX952-R 1M *1 NPN EE-SX953-W 1M *1 PNP EE-SX953P-W 1M *2 NPN EE-SX953-R 1M *1 NPN EE-SX954-W 1M *1 PNP EE-SX954P-
PAGE 3
EE-SX95 Ratings and Specifications Type Item Standard L-shaped F-shaped R-shaped U-shaped NPN output Pre-wired EE-SX950-@ EE-SX951-@ EE-SX952-@ EE-SX953-@ EE-SX954-@ PNP output Pre-wired EE-SX950P-@ EE-SX951P-@ EE-SX952P-@ EE-SX953P-@ EE-SX954P-@ Sensing distance 5 mm (slot width) Standard sensing object Opaque: 1.8 × 0.8 mm min. Differential travel 0.025 mm max.
PAGE 4
EE-SX95 Engineering Data (Reference Value) Sensing Position Characteristics Repeated Sensing Position Characteristics Dark-ON Dark-ON Dark-ON d Insertion direction Insertion direction d d=±0.002 d Light-ON Light-ON 0 1 2 3 4 5 6 Distance d (mm) 0 1 2 3 4 5 6 Distance d (mm) Light-ON 2.92 2.94 2.96 2.98 Distance d (mm) Vcc = 24 V, No. of repetitions: 20, Ta = 25°C (Differential travel = 0.025 mm max.) Note: The data applies to dark status.
PAGE 5
EE-SX95 Safety Precautions Refer to Warranty and Limitations of Liability. with a voltage input by connecting a resistor between the power source and output. Select a resistor with reference to the following example. The resistance of the resistor is generally 4.7 kΩ and its wattage is 1/2 W for a supply voltage of 24 V and 1/4 W for 12 V. WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes.
PAGE 6
EE-SX95 (Unit: mm) Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Dimensions Sensors EE-SX950-@ EE-SX950P-@ EE-SX951-@ EE-SX951P-@ Light indicator (red) 6 Optical axis 2.7 7.9 13.4 5 6 12 (2) 2.7 5 1.6 5.8 1.8 3.2 0.8 8 13.4 5 8 Optical axis 2.7 4 12 6 Sensing window (2) 6.9 6.5 Sensing window 4.2 dia. Two, 3.2 dia. holes 3 1.75 Light indicator (red) 6.5 2.3 Light indicator (red) Optical axis 23.9 12 Optical axis 3 0.8 7.9 1.
PAGE 7
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron).
PAGE 8
OMRON Corporation Industrial Automation Company Authorized Distributor: Tokyo, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Sensor Business Unit Carl-Benz-Str. 4, D-71154 Nufringen, Germany Tel: (49) 7032-811-0/Fax: (49) 7032-811-199 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No.