Datasheet

2
Ratings and Specifications
*1. The Connector has a built-in locking mechanism. To remove the Connector from the Sensor, grip the top and bottom of the Connector
housing, as shown in the following diagram, and then pull out the Connector.
*2. EE-SX67@ and EE-SY67@ are the best used in the light-ON state.
*3. The insertion/removal durability and lock strength apply only to the lock mechanism.
They do not apply to the EE-1001, EE-1001-1, and EE-1006, which do not have lock mechanisms.
*4. Do not store the type EE-1009, EE-1001, EE-1001-1 and EE-1002 under the following conditions since their terminals may discolor.
(1)In the place exposed to the direct sunlight, the high temperature or high humidity.
Product Connector *1 *4
Connector with
Cable *1
Connector with
Robot Cable *1
Connector *4
Connector
(short-circuited
between posi-
tive (+) and L
terminals) *2 *4
Connector with
Cable
Model EE-1009 EE-1010 EE-1010-R EE-1001 EE-1001-1 EE-1006
Item
Appearance
Contact resistance 20 mΩ max. (at 20 mV max., 100 mA max.) 15 mΩ max. (at 100 VDC max.)
10 mΩ max.
(100 VDC max.)
Insertion/removal
durability *3
50 times min. ---
Insertion strength No. of poles ✕ 6 N max. 50 N max.
Surplus strength
(housing holding strength)
No. of poles ✕ 0.4 N max. --- 20 N max.
Standard cable length --- 1 m, 2 m --- 1 m, 2 m
Lock strength *3 No. of poles ✕ 29 N min. ---
Ambient humidity −10 to +60°C −10 to +75°C −10 to 60°C
Material
Housing Polybutylene phthalate (PBT)
Contact Phosphor bronze
Applicable
Photomicrosensors
EE-SX67 @ (A,P,R) (Connector Models only), EE-SX47 @ , EE-SY67 @ , EE-SPY31 @ /41 @ , EE-SPX303N/403N,
EE-SPW311/411
Product Connector *4
Connector with
Cable
Connector with
Cable
Connector with
Robot Cable
Connector with
Cable
Connector with
Robot Cable
Model EE-1002 EE-1003 EE-1013 EE-1016-R EE-1017 EE-1017-R
Item
Appearance
Contact resistance
10 mΩ max.
(at 10 mADC
and 1 ADC)
20 mΩ max.
(at minute current of 1 kHz and
500 VDC)
25 mΩ max.
(at 10 mA DC and 20 mV max.)
Insertion strength 20 N max. 23.5 N max. 40 N max. 20 N max.
Surplus strength
(housing holding strength)
15 N min. (initial)
10 N min.
(ten times)
3.5 N min. 10 N min. 15 N min. 1.5 N min.
Cable length --- 1 m 2 m 1 m, 3 m
Ambient humidity −10 to +75°C −10 to +60°C −10 to +55°C −25 to +85°C −10 to +60°C
Material
Housing Nylon
Contact Phosphor bronze
Applicable
Photomicrosensors
EE-SPX301/401,
EE-SPY30@/40@,
EE-SPZ301-A/401-A
EE-
SPX74@/84@
EE-
SX95@-C1J-R
EE-SX97@C1, EE-SX97@P-C1
Sensor
Connector