Datasheet

ManualsBrandsOmron Industrial Automation ManualsDistributors & TestersConnector With Cable, - , 2m,

Accessories (Order Separately)

Ordering Information

Connectors and Connector Hold-down Clips

*1. EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the

Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism

prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.

*2. The case (housing) and dispersion pins (for hand-crimping) for EE-1006 Connectors can be ordered separately. Use the EE-1006T Special

Crimping Tool to prepare the Connector.

Applicable Sensor models

EE-SX67@ (A, P, R), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411

Type Cable length Model Remarks

Connector

EE-1001

EE-1001-1

L terminal and positive (+) terminal are already short-circuited.

EE-1009 *1

Connector with

Cable

1 m

EE-1006 1M

EE-1010 1M *1

2 m

EE-1006 2M 4 conductors

EE-1006D 3 conductors

EE-1006L 2 conductors

EE-1010 2M *1

Connector with

Robot Cable

1 m EE-1010-R 1M *1

2 m EE-1010-R 2M*1

NPN/PNP Conversion

Connector

0.46 m

(total length)

EE-2002

Connector Hold-down Clip EE-1006A

For EE-1006, EE-SX670

, 470, EE-SY671, and 672 only.

Connector Parts

Case (housing) EE-1006H 100 per carton

Dispersion Pins EE-1006C 500 per carton

Special Crimping Tool EE-1006T

Applicable Sensor models

EE-SX95@-C1J-R

Item Cable length Model Remarks

Connector with Robot Cable

2 m EE-1016-R 2M

Applicable Sensor models

EE-SX97@-C1, EE-SX97@P-C1

Item Cable length Model Remarks

Connector with Cable

1 m EE-1017 1M

3 m EE-1017 3M

Connector with Robot Cable

1 m EE-1017-R 1M

3 m EE-1017-R 3M

Handle

Ratchet

Crimping section

Switching knob

Appearance

Sensor

Connector

Applicable Sensor models

EE-SPX74@/84@

Item Cable length Model Remarks

Connector with Cable 1 m EE-1013 1M

Applicable Sensor models

EE-SPX301/401, EE-SPY30@/40@, EE-SPZ301-A/401-A

Item Cable length Model Remarks

Connector EE-1002

Connector with Cable

1 m EE-1003

NPN/PNP Conversion

Connector

0.46 m

(total length)

EE-2001

Connector Hold-down Clip EE-1003A For EE-1003 only.

CSM_PhotoMicro_OP_E_12_3

Summary of content (7 pages)

PAGE 1
CSM_PhotoMicro_OP_E_12_3 Accessories (Order Separately) Ordering Information Connectors and Connector Hold-down Clips Applicable Sensor models EE-SX67@ (A, P, R), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411 Type Cable length Model Remarks EE-1001 Connector EE-1001-1 L terminal and positive (+) terminal are already short-circuited.
PAGE 2
Ratings and Specifications Product Connector *1 *4 Model EE-1009 Connector with Connector with Cable *1 Robot Cable *1 EE-1010 EE-1010-R Connector (short-circuited Connector with between posiCable tive (+) and L terminals) *2 *4 EE-1001-1 EE-1006 Connector *4 EE-1001 Appearance Item Contact resistance Insertion/removal durability *3 Insertion strength Surplus strength (housing holding strength) Standard cable length Lock strength *3 Ambient humidity Housing Material Contact Applicable Photomicrose
PAGE 3
(Unit: mm) Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Photomicrosensor Connectors and Connector Hold-down Clips Dimensions Connector EE-1001 13 2.54±0.15 4 0.6 Terminal Arrangement (1) (2) (3) (4) 10.8 6 L OUT (1) (2) (3) (4) 2.9±1 Connector (short-circuited between positive (+) and L terminals) 13 EE-1001-1 4 0.6 5 1.4 Terminal Arrangement (1) (2) (3) (4) L OUT 2.5 10.8 3±0.3 6 (1) (2) (3) (4) 2.54 0.8 2.8±0.1 1.5 3.9±0.4 7.
PAGE 4
Photomicrosensor Connectors Connectors EE-1009 13 2-C1 4 5 0.6 Terminal Arrangement 1.4 2.5 9 (1) (2) (3) (4) 4.5 L OUT (1) (2) (3) (4) 1.2 0.8 2.5 2.54 1.5 7.62 Connector with Cable EE-1010 2M (EE-1010 1M) Connector with Robot Cable EE-1010-R 2M (EE-1010-R 1M) 13.5 2-C1 13 7.62 (1) (2) (3) (4) 2.54 20±5 2,000 (1,000) 15±5 25±5 5 0.6 1.4 2.5 4 EE-1010 cable EE-1010-R cable: 4-dia. 4-conductor vinyl-insulated round cable (Conductor cross section: 0.
PAGE 5
Photomicrosensor Connectors and Connector Hold-down Clips Connector EE-1002 Connector with Cable EE-1003 0.75 2.5 16.62 6 3 6 Connector Hold-down Clips (For EE-1003 only) EE-1003A 11 5 1.75 4.9 20 5.7 10.7 4.2 14.2 1 22 Two, 3.2 dia. hole 1 25.5 3.5 2.9 1 8 16.5 11 1 OUT 2 6 5.5 1,000±20 3±1 1.2 0.6 0.25 2.5 2 5 1.2 (3) (2) (1) Blue Black Brown 5 2.5 11.5 4 Cable: 1.61-dia. 1-conductor vinyl-insulated round cable (Conductor cross section: 0.33 mm2). 13.
PAGE 6
NPN to PNP Transistor Output Conversion Connectors NPN/PNP Conversion Connector EE-2001 NPN/PNP Conversion Connector EE-2002 * Terminal Arrangement Terminal Arrangement (1) (2) (3) OUT Brown Black Blue (1) (2) (3) OUT Brown Black Blue *The EE-SX67@ and EESY67@ do not support LightON mode. 8 10.7 20 200 40 16.2 200 8 dia. 12 12.5 Connector side (sensor side) 4.9 20 200 40 200 8 dia. 12 11.8 5.
PAGE 7
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron).