Datasheet

ManualsBrandsOmron Industrial Automation ManualsMiscellaneous Sensor AccessoriesPressure Sensor Adapter Suitable for Pressure Sensors E8PC

IoT Pressure Sensors

E8PC

Detect Signs of Abnormalities in

Cooling Water and Hydraulic Oil by

Simultaneous Measurement of

!Pressure + Temperature"

• Multi-sensing of •Pressure + temperature• for preventing a

sudden stops or manufacturing defects.

• Various lineup of replacement adapters to enable easy

replacement of your current pressure gauges and flow meters.

• Analog current output function in addition to the IO-Link

communications function that can perform self-diagnosis of

abnormalities in the sensor itself.

Ordering Information

Sensors [Refer to Dimensions on page 34.]

Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file).

* The applicable fluid is a liquid that do not erode the liquid contact part materials (such as water, glycol solution, and oil).

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Refer to Safety Precautions on page 32.

Appearance Applicable fluid *

Rated pressure

range

Control output

Communication

method

IO-Link baud rate Model

Liquid and gas -0.1 to 1 MPa

PNP

IO-Link

Analog

COM2 (38.4 kbps) E8PC-010D-E

COM3 (230.4 kbps) E8PC-010T-E

NPN Analog --- E8PC-010-E

Liquid

0 to 10 MPa

PNP

IO-Link

Analog

COM2 (38.4 kbps) E8PC-100D-E

COM3 (230.4 kbps) E8PC-100T-E

NPN Analog --- E8PC-100-E

0 to 40 MPa

PNP

IO-Link

Analog

COM2 (38.4 kbps) E8PC-400D-E

COM3 (230.4 kbps) E8PC-400T-E

NPN Analog --- E8PC-400-E

Summary of content (13 pages)

PAGE 1
IoT Pressure Sensors E8PC Detect Signs of Abnormalities in Cooling Water and Hydraulic Oil by Simultaneous Measurement of !Pressure + Temperature" • Multi-sensing of •Pressure + temperature• for preventing a sudden stops or manufacturing defects. • Various lineup of replacement adapters to enable easy replacement of your current pressure gauges and flow meters.
PAGE 2
E8PC Adapters [Refer to Dimensions on page 34.] It must be selected from the adapters below.
PAGE 3
E8PC Cables (Sensor I/O Connectors) A Cable is not provided with the Sensor. It must be ordered separately. Type Appearance Cable Straight Socket on one cable end L-shaped Straight/straight Socket and plug on cable ends * L-shaped/L-shaped Model 2m XS5F-D421-D80-F 5m XS5F-D421-G80-F 2m XS5F-D422-D80-F 5m XS5F-D422-G80-F 2m XS5W-D421-D81-F 5m XS5W-D421-G81-F 2m XS5W-D422-D81-F 5m XS5W-D422-G81-F Note: Refer to Sensor I/O Connector/Sensor Controller on your OMRON website for details.
PAGE 4
E8PC Ratings and Specifications Sensors Model PNP(COM2) E8PC-010D-E E8PC-100D-E E8PC-400D-E PNP(COM3) E8PC-010T-E E8PC-100T-E E8PC-400T-E NPN E8PC-010-E Rated pressure range Pressure monitoring *1 Temperature monitoring *7 -0.1 to 1 MPa E8PC-100-E E8PC-400-E 0 to 10 MPa 0 to 40 MPa -0.10 to 44.00 MPa Display range -0.20 to 1.10 MPa -0.10 to 11.00 MPa Withstand pressure *2 4 MPa 30 MPa 50 MPa Burst pressure 8 MPa 60 MPa 80 MPa Display resolution 0.001 MPa 0.01 MPa 0.
PAGE 5
E8PC Model PNP(COM2) E8PC-010D-E E8PC-100D-E E8PC-400D-E PNP(COM3) E8PC-010T-E E8PC-100T-E E8PC-400T-E E8PC-100-E E8PC-400-E NPN E8PC-010-E IO-Link Power supply IO-Link specification Ver 1.1 Baud rate E8PC-@@@D: COM2 (38.4kbps) E8PC-@@@T: COM3 (230.4Kbps) Data length PD Size: 6 byte OD Size: 1 byte (M-sequence type: TYPE_2_V) Minimum cycle time E8PC-@@@D (COM2): 3.2 ms E8PC-@@@T (COM3): 2.
PAGE 6
E8PC I/O Circuit Diagrams PNP output Model External input mode 1 Standard I/O mode (SIO mode) * I/O Circuit Diagrams Output mode +V 1 External input OUT1 Pressure sensor Control output mode Analog current output mode +V 1 OUT1 OUT1 4 4 10 to 30 VDC EXTIN 2 Pressure sensor 100 mA or less OUT2 2 10 to 30 VDC Analog 2 4 to 20mA 100 mA or less 10 to 30 VDC Load 3 3 0V 4 Load 3 100 mA or less Pressure sensor Load Load Load 100 mA or less +V 0V 0V E8PC-@@@D-E E8PC-@@@T-
PAGE 7
E8PC Timing Charts The timing chart is described below by using the pressure control output of OUT1 as an example. The activity is the same even when temperature control output is set in OUT2. PNP output Model Output mode Timing charts *2 N.O./N.C. setting *1 Standard mode Window mode Pressure Pressure Threshold level Hysteresis Threshold level.H Hysteresis Hysteresis Threshold level.L N.O.
PAGE 8
E8PC NPN output Model Timing charts *2 N.O./N.C. setting *1 Standard mode Window mode Pressure Pressure Threshold level Hysteresis Threshold level.H Hysteresis Hysteresis Threshold level.L N.O. *3 Time Time OUT1 control output OUT1 control output ON OFF ON OUT1 operation indicator (orange) OFF ON OFF OUT1 operation indicator (orange) ON OFF E8PC-@@@-E Pressure Pressure Hysteresis Threshold level Threshold level.H Hysteresis Hysteresis Threshold level.L N.C.
PAGE 9
E8PC Nomenclature [Status indicators: green/orange/red] Lit up according to the measured value and setting of pressure and temperature. bar psi [Unit indicator: white] Displays the current unit setting. [Communication indicator: green] Lit up when IO-Link communications are in progress. [Output indicator: orange] Lit up when output is ON. Mode switching [MODE] button Calls a menu, selects (determine) a menu, and switches the unit. [Measured value: white digital] Displays the measured value.
PAGE 10
E8PC Safety Precautions Be sure to read the precautions for all models in the website at: http://www.ia.omron.com/. Warning Indications Warning Caution Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury, or may result in serious injury or death. Additionally, there may be significant property damage. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage.
PAGE 11
E8PC • If the load and sensor use separate power supplies, turn ON the sensor's power first. • Process unwired terminals so that they do not contact other wire or equipment. • Do not use the product with the main unit damaged. • Be careful with the sharp screw parts. • Do not pull connected cables hard. • Do not use organic solvents such as thinner or alcohol for cleaning because they deteriorate the degree of protection and indication performance.
PAGE 12
E8PC Dimensions (Unit: mm) Sensors IoT Pressure Sensor E8PC-@@@-E 34 dia. 44.50 M12×1 G3/4 effective length 10 90.9 47.50 * 15.40 2.60 30 dia. 27 (double walled) 27.50 (27.50) Sensing part 11 dia. Depth 2.9 (E8PC-010-E) 7 dia. Depth 2.9 (E8PC-100/400-E) * There is no vent in E8PC-100/400-E. Adapter E8PC-YA-A@@ E8PC-YA-C@@ C0.5 E dia. E8PC-YA-A18 E8PC-YA-A14 E8PC-YA-A38 E8PC-YA-C18 E8PC-YA-C14 Thread Model G3/4×R1/8 G3/4×R1/4 G3/4×R3/8 G3/4×NPT1/8 G3/4×NPT1/4 A 43.3 47.1 47.
PAGE 13
E8PC Throttle E8PC-YS E8PC-YS-N 1.2±0.10 0.5 dia. (9.09) 1.2 1.2 M6×0.75 10 dia. 4.2 1.6 M6×0.75 3 C1 O-ring E8PC-YL-2 E8PC-YL-1 15 dia. 22.5 dia. A A A A 12.8 dia. 8 dia. 19.5 dia. 1.5 Cross-sectional view A-A 1.9 2.4 Cross-sectional view A-A E8PC-YL-3 14 dia. A 17.6 dia. A 1.8 Cross-sectional view A-A Cable Refer to page 22 of E8FC.