Datasheet
E8FC
16
Timing Charts
The PNP output is described below by using the flow rate control output of OUT1 as an example.
The activity is the same even when temperature control output is selected in OUT2.
PNP output
*1. The N.O./N.C. setting can be changed by the operation buttons or IO-Link communications.
*2. The timer function can be set individually for OUT1 and OUT2 by the operation buttons or IO-Link communications.
(Selection of ON delay, OFF delay, or one-shot function, and selection of a timer time from 1 to 9999 ms)
The delay timing of each function is same as the NPN output. Refer to the next page.
*3. Factory default
Model Output mode
N.O./N.C.
setting
*1
Timing charts *2
Standard mode Window mode
E8FC-25D
E8FC-25T
Standard I/O
mode
(SIO mode)
N.O.
*3
N.C.
IO-Link mode
N.O.
*3
N.C.
ON
OFF
ON
OFF
Time
Flow rate
OUT1 operation
indicator (orange)
OUT1 control
output
Hysteresis
Threshold
level
Hysteresis
Hysteresis
ON
OFF
ON
OFF
Threshold
level.H
Threshold
level.L
Time
Flow rate
OUT1 operation
indicator (orange)
OUT1 control
output
ON
OFF
ON
OFF
Time
Flow rate
OUT1 operation
indicator (orange)
OUT1 control
output
Hysteresis
Threshold
level
ON
OFF
ON
OFF
Hysteresis
Hysteresis
Time
Flow rate
OUT1 operation
indicator (orange)
OUT1 control
output
Threshold
level.H
Threshold
level.L
1
0
Time
OUT1 operation
indicator (orange)
Communication
indicator (Green)
ON
OFF
Lighting
Threshold
level
Flow rate
OUT1 control output
(Byte1_bit0)
Hysteresis
Hysteresis
Hysteresis
1
0
ON
OFF
Threshold
level.H
Threshold
level.L
Lighting
Time
OUT1 operation
indicator (orange)
Communication
indicator (Green)
Flow rate
OUT1 control output
(Byte1_bit0)
Lighting
Threshold
level
1
0
Time
OUT1 operation
indicator (orange)
Communication
indicator (Green)
ON
OFF
Flow rate
OUT1 control output
(Byte1_bit0)
Hysteresis
1
0
OUT1 operation
indicator (orange)
Communication
indicator (Green)
OUT1 control output
(Byte1_bit0)
Flow rate
Time
Hysteresis
Hysteresis
ON
OFF
Threshold
level.H
Threshold
level.L
Lighting