Datasheet

E8FC
12
Adapters [Refer to Dimensions on page 21.]
It must be selected from the adapters below.
* The applicable diameter is the size of the part shown below at the piping side.
Cables (Sensor I/O Connectors)
A Cable is not provided with the Sensor. It must be ordered separately.
Note: Refer to
Sensor I/O Connectors/Sensor Controllers on OMRON website for details.
* Straight type/L-shape type combinations are also available.
O-ring (for replacement)
[Refer to Dimensions on page 22.]
Appearance
Applicable diameter *
Thread type Materials Model
Nominal
diameter A
Nominal
diameter B
10 A 3/8•
R (taper thread)
SUS304
E8FC-YA-R10A
NPT (taper thread) E8FC-YA-N10A
15 A 1/2•
R (taper thread) E8FC-YA-R15A
NPT (taper thread) E8FC-YA-N15A
20 A 3/4•
R (taper thread) E8FC-YA-R20A
NPT (taper thread) E8FC-YA-N20A
25 A 1•
R (taper thread) E8FC-YA-R25A
NPT (taper thread) E8FC-YA-N25A
Type Appearance Cable Model
Socket on one
cable end
2 m XS5F-D421-D80-F
5 m XS5F-D421-G80-F
2 m XS5F-D422-D80-F
5 m XS5F-D422-G80-F
Socket and plug on
cable ends
*
2 m XS5W-D421-D81-F
5 m XS5W-D421-G81-F
2 m XS5W-D422-D81-F
5 m XS5W-D422-G81-F
Appearance Type Model
For E8FC-25@ E8FC-YL-1
Piping side
Applicable diameter
Straight
L-shaped
Straight/straight
L-shaped/L-shaped