User Manual

E5CD/E5CD-B
5
Optional Products (Order Separately)
USB-Serial Conversion Cable
Terminal Covers
(Cannot be used on a Push-In Plus terminal block type)
Note: The E53-COV10 cannot be used.
Refer to page 14 for the mounted dimensions.
* E53-COV23 are provided with the Digital Temperature Controller.
Waterproof Packing
Note: This Waterproof Packing is provided with the Digital
Temperature Controller.
Current Transformers (CTs)
*Lead wires are included with these CTs. If UL certification is required, use
these CTs.
Adapter
Note: Use this Adapter when the panel has already been prepared for
an E5B@ Controller.
Waterproof Cover
Mounting Adapter
Note: This Mounting Adapter is provided with the Digital Temperature
Controller.
DIN Track Mounting Adapter
(Cannot be used on a Push-In Plus terminal block type)
Front Covers
Draw-out Jig
(Cannot be used on a Push-In Plus terminal block type)
CX-Thermo Support Software
Note: CX-Thermo version 4.66 or higher is required for the E5CD.
CX-Thermo version 4.67 or higher is required for the E5CD-B.
For the system requirements for the CX-Thermo, refer to
information on the EST2-2C-MV4 on the OMRON website
(www.ia.omron.com).
Model
E58-CIFQ2
Model
E53-COV17
E53-COV23 (3pcs) *
Model
Y92S-P8
Hole diameter Model
5.8 mm E54-CT1
5.8 mm E54-CT1L*
12.0 mm E54-CT3
12.0 mm E54-CT3L*
Model
Y92F-45
Model
Y92A-48N
Model
Y92F-49
Model
Y92F-52
Type Model
Hard Front Cover Y92A-48H
Soft Front Cover Y92A-48D
Model
Y92F-58
Model
EST2-2C-MV4