User Manual

E5ED/E5ED-B
33
Isolation/Insulation Block Diagrams
Note: Auxiliary outputs 1 and 2 and auxiliary outputs 3 and 4 are not insulated.
Nomenclature
Sensor input and CT input
Communications and event inputs
Voltage output (for driving SSR),
linear current output, and transfer output
Relay output 1
Auxiliary outputs 1, 2
: Reinforced insulation
: Functional isolation
Power
supply
Auxiliary outputs 3, 4
Relay output 2
Front-panel Setup Tool port
No. 3 display
Manipulated value or other value
Press O Key once to go to Adjustment Level.
Press O Key for at least 3 seconds to go to Initial Setting Level.
Operation indicators
No. 1 display
No. 2 display
Temperature unit
Front panel
PV or specified parameter
SP or specified parameter value
Top View
Top-panel
Setup
Tool port
Use the M Key to change to another parameter.
Use S Key to change the digit (default setting).
Use the U D Keys to set the
parameter.
Bar display
E5ED/E5ED-B