User Manual

14
Communications Function Section 1-4
Setting Communications
Data
Match the communications specifications of the E5CN/AN/EN and the host
computer. If a 1:N connection is being used, ensure that the communications
specifications for all devices in the system (except the communications Unit
No.) are the same.
Parameter Symbol Setting (monitor) value Selection symbols Default Unit
Protocol setting psel CompoWay/F (SYSWAY),
Modbus
cwf, mod CompoWay/F
(SYSWAY)
None
Communications
Unit No.
u-no 0 to 99 1 None
Communications
baud rate
bps 1.2, 2.4, 4.8, 9.6, 19.2, 38.4 1.2, 2.4, 4.8, 9.6, 19.2, 38.4 9.6 kbit/s
Communications
data length
len 7, 8 7 Bits
Communications
stop bits
sbit 1, 2 2 Bits
Communications
parity
prty None, Even, Odd none, even, odd Even None
Send data wait time sdwe 0 to 99 20 ms