User Manual

217
Appendix A
Protect Level
Communications Setting Level
Alarm SP selection alsp SP-M: Ramp set point
SP: Set point
sp-m, sp SP-M None
Move to calibration
level
cmov −1999 to 9,999 0 None
Parameters Characters Setting (monitor) value Display Default Unit Set value
Move to protect level pmov −1999 to 9,999 0 None
Operation/adjust-
ment protect
oapt 0 to 3 0 None
Initial setting/com-
munications protect
icpt 0 to 2 1 None
Setting change pro-
tect
wtpt OFF, ON off, on OFF None
Parameter mask
enable
pmsk OFF, ON off, on ON None
Password to move to
protect level
prlp −1999 to 9,999 0 None
Parameters Characters Setting (monitor) value Display Default Unit Set value
Protocol setting psel CompoWay/F (SYSWAY),
Modbus (See note 3.)
cwf, mod Compo-
Way/F
(SYSWAY)
None
Communications
Unit No.
u-no 0 to 99 1 None
Communications
baud rate
bps 1.2, 2.4, 4.8, 9.6, 19.2, or 38.4 1.2, 2.4,
4.8, 9.6,
19.2, 38.4
9.6 kbps
Communications
data length
len 7, 8 7 Bit
Communications
stop bits
sbit 1, 2 2 Bit
Communications
parity
prty None, Even, Odd none,
even, odd
Even None
Send data wait time sdwt 0 to 99 20 ms
Parameters Characters Setting (monitor) value Display Default Unit Set value