User Manual

128

Operation Level Section 5-3

This parameter is used to check the manipulated variable for the cooling con-

trol output during operation.

• This parameter cannot be set.

• During heating/cooling control, the manipulated variable on the cooling

control output is monitored.

• The default is OFF and the manipulated variable is not displayed.

■ Related Parameters

Standard or heating/cooling (initial setting level): Page 150

MV display (advanced function setting level): Page 166

c-o MV Monitor (Cooling)

The control system must be set to

heating/cooling control.

The “MV display” parameter must be

set to ON.

Control Monitor range Unit

Heating/cooling 0.0 to 105.0 %

Function

Monitor

See