Datasheet

ManualsBrandsOmron Industrial Automation ManualsOptical SensorsDiffuse Reflective Sensor 1m PNP

E3Z

A-43E3Z

General purpose sensors in compact plastic housing

E3Z

• Compact housing size and high power

LED for excellent performance-size

ratio

• IP67 and IP69k for highest protection

in wet environments

Features

Basic

performance

Reliability

Easy-to-

operate

Environmental

protection

Globalization

Basic performance

Through-beam Model

Retroreflective model

(with MSR function)

30m

Diffuse-reflective model

Dimensions

10.4mm 20mm

31mm

Distance-setting model

0.2m

Eliminates the influ-

ence of installation

and on-site condi-

tions, thus increasing

the reliability of the

line.

High protection against water and dust contami-

nants

High immunity to electrical interference, such

as inverter drives.

Reliability

100

120

3 10 100

Inverter frequency (kHz)

Inverter noise voltage (V)

E3Z

F502-EN2-04.book Seite 43 Dienstag, 26. Juli 2005 5:48 17

Summary of content (24 pages)

PAGE 1
F502-EN2-04.book Seite 43 Dienstag, 26. Juli 2005 5:48 17 General purpose sensors in compact plastic housing E3Z E3Z • Compact housing size and high power LED for excellent performance-size ratio • IP67 and IP69k for highest protection in wet environments Basic performance Easy-tooperate Reliability Globalization Environmental protection Features Basic performance Through-beam Model 30m Retroreflective model (with MSR function) Dimensions 10.
PAGE 2
F502-EN2-04.book Seite 44 Dienstag, 26. Juli 2005 5:48 17 Stability E3Z-series reliability covers a wide range of object/background combinations, so ensuring stable detection regardless of workpiece color or reflectivity. Environmental protection Photoelectric Sensor with Built-in Amplifier E3Z is environmental-friendly, energy-saving. Power Consumption Comparison Conventional sensor Saves energy * E3Z Approx. 30 % less * The above figure is based on measurement under normal operating conditions.
PAGE 3
F502-EN2-04.book Seite 45 Dienstag, 26. Juli 2005 5:48 17 E3Z Narrow Beam model Ideal for detecting small objects with a small spot: ●Tiny objects as little as 0.1 mm in diameter can be detected with its 2.5mm dia. spot. ● The thin beam enables detection through gaps or small holes. ●The high-intensity spot of light enables visual alignment of sensing spot position. Transparent PET bottles Stable detection of recyclable thin-wall PET bottles.
PAGE 4
F502-EN2-04.book Seite 46 Dienstag, 26.
PAGE 5
F502-EN2-04.book Seite 47 Dienstag, 26. Juli 2005 5:48 17 Ordering Information Sensor type Red light Shape Connection method Model NPN output PNP output E3Z-T62 E3Z-T82 E3Z-T62-G0*2 E3Z-T82-G0 E3Z-T67 E3Z-T87 E3Z-T67-G0 E3Z-T87-G0 Sensing distance Pre-wired models (2 m)*1 30m Connector type Pre-wired models (2 m)*1 Connector type Pre-wired models (2 m)*1 Connector type Pre-wired (2 m)*1 Through-beam Retroreflective model (with M.S.R.
PAGE 6
F502-EN2-04.book Seite 48 Dienstag, 26. Juli 2005 5:48 17 Reflectors Not provided with retroreflective models Name Sensing distance (typical) * 3 m [100 mm] (Rated value) 4 m [100 mm] (Rated value) 500 mm [80 mm] 2 m [100 mm] 5 m [100 mm] 2.5 m [100 mm] 3.5 m [100 mm] 500 mm [80 mm] 2 m [100 mm] 1.5 m [50 mm] 700 mm [150 mm] 1.1 m [150 mm] 1.
PAGE 7
F502-EN2-04.book Seite 49 Dienstag, 26.
PAGE 8
F502-EN2-04.book Seite 50 Dienstag, 26. Juli 2005 5:48 17 Rating/performance Sensor type Model NPN output Item PNP output Sensing distance Through-beam E3Z-T62/T67 E3Z-T82/T87 30 m Retroreflective model (with M.S.R. function) E3Z-T61/T66 E3Z-T61A/T66A E3Z-T81/T86 E3Z-T81A/T86A 15 m 10 m --- Reflectivity characteristic --- Spot Diameter --- Opaque: 12-mm dia. min.
PAGE 9
F502-EN2-04.book Seite 51 Dienstag, 26. Juli 2005 5:48 17 Rating/performance Distancesettable narrow-beam E3Z-L61/66 E3Z-LS61/66 Retro-reflective for PET bottles (without MSR function) Grooved-type standard-beam wide-beam E3Z-B61/66 E3Z-B62/67 E3Z-G61 E3Z-G62 E3Z-B81/86 E3Z-B82/87 E3Z-G81 E3Z-G82 E3Z-L81/86 E3Z-LS81/86 90 ± 30 mm (White paper 100 x 100 mm) BGS: White or black paper (100 x 100 mm): 20 mm to set distance FGS: White paper (100 x 100 mm): Set distance to 200 mm min.
PAGE 10
F502-EN2-04.book Seite 52 Dienstag, 26. Juli 2005 5:48 17 Rating/performance Sensor type Model NPN output Item PNP output Through-beam Retroreflective model (with M.S.R. function) Diffuse-reflective wide-beam standard-beam E3Z-T62/T67 E3Z-T61/T66 E3Z-T61A/T66A E3Z-R61/R66 E3Z-D61/D66 E3Z-D62/D67 E3Z-T82/T87 E3Z-T81/T86 E3Z-T81A/T86A E3Z-R81/R86 E3Z-D81/D86 E3Z-D82/D87 Vibration resistance 10 to 55 Hz, 1.
PAGE 11
F502-EN2-04.book Seite 53 Dienstag, 26. Juli 2005 5:48 17 Rating/performance Distancesettable narrow-beam Retro-reflective for PET bottles (without MSR function) Grooved-type standard-beam wide-beam E3Z-L61/66 E3Z-LS61/66 E3Z-B61/66 E3Z-B62/67 E3Z-G61 E3Z-G62 E3Z-L81/86 E3Z-LS81/86 E3Z-B81/86 E3Z-B82/87 E3Z-G81 E3Z-G82 10 to 55 Hz, 1.
PAGE 12
F502-EN2-04.book Seite 54 Dienstag, 26. Juli 2005 5:48 17 Caracteristic data (typical) Operating Range Narrow-beam Retroreflective Models for transparent objects Distance Y (mm) Distance Y (mm) 10 Sensing object: 8 white paper (100 x 100 mm) Y 6 X 4 E3Z-B#2/B#7 + E39-R1S (optional reflector) Distance Y (mm) E3Z-B#1/B#6 + E39-R1S (optional reflector) E3Z-L 50 Reflector: E39-R1S 40 Y 30 X 20 0 20 0 40 60 80 100 -2 120 0.5 1 1.
PAGE 13
F502-EN2-04.book Seite 55 Dienstag, 26. Juli 2005 5:48 17 Narrow-beam E3Z-L 30 10 7 5 100 70 Sensing object: 300 x 300 mm white paper 50 Excess gain (factor) 100 70 Sensing object: 300 x 300 mm white paper 50 30 10 7 5 100 70 50 30 10 7 5 3 3 Operating level 1 Operating level 1 0.7 0.5 0.7 0.5 Operation level 1 0.7 0.5 0.3 0.3 0.3 0.1 0.1 0 50 100 150 200 250 300 E3Z Diffuse-reflective E3Z-D#2(D#7) Excess gain ratio Excess gain ratio Diffuse-reflective E3Z-D#1(D#6) 3 0 0.
PAGE 14
F502-EN2-04.book Seite 56 Dienstag, 26. Juli 2005 5:48 17 Spot diameter vs. Distance Distance setting E3Z-L E3Z-LS 6 Spot diameter (mm) Spot diameter (mm) Narrow-beam 5 4 3 20 18 16 14 12 10 8 2 6 4 1 2 0 20 40 60 80 100 120 140 160 50 0 100 150 Distance (mm) 200 250 300 Sensing object size (mm) Differential travel / Hysteresis vs.
PAGE 15
F502-EN2-04.book Seite 57 Dienstag, 26. Juli 2005 5:48 17 FGS Mode Set Distance vs. Sensing Range E3Z Distance setting E3Z-LS White Paper Black Paper Sensing range (mm) Sensing range (mm) 800 800 700 700 600 600 500 500 400 400 300 300 200 200 100 100 0 50 100 150 200 250 300 0 50 100 150 200 Set distance (mm) 250 300 Set distance (mm) Sensing Distance vs.
PAGE 16
F502-EN2-04.book Seite 58 Dienstag, 26.
PAGE 17
F502-EN2-04.book Seite 59 Dienstag, 26.
PAGE 18
F502-EN2-04.book Seite 60 Dienstag, 26. Juli 2005 5:48 17 Connectors (Sensor I/O connectors) 4 3 2 1 Wire colors Brown White Blue Black 1 2 3 4 XS3F-M421-402-A XS3F-M421-405-A XS3F-M422-402-A XS3F-M422-405-A A-60 Class For DC Wire, outer jacket color Connector pin No.
PAGE 19
F502-EN2-04.book Seite 61 Dienstag, 26. Juli 2005 5:48 17 Nomenclature: Slit for through-beam model (Optional accessory: E39-S65A/B/C/D/E/F) Diffuse-reflective E3Z-D## E3Z-L## (Slit) (Sensor) E3Z Through-beam E3Z-T## Receiver E3Z-T##A Receiver Retroreflective Models E3Z-R## E3Z-B## Operation Upper indented mounting portion Hook Protruding portion Slit Stability indicator (green) Lower mounting dent portion Mounting method 1.
PAGE 20
F502-EN2-04.book Seite 62 Dienstag, 26. Juli 2005 5:48 17 Precautions ! Caution Do not connect an AC power supply to the Sensor. If AC power (100 VAC or more) is supplied to the Sensor, it may explode or burn. Be sure to abide by the following precautions for the safe operation of the Sensor. Wiring Power Supply Voltage and Output Load Power Supply Voltage Make sure that the power supply to the Sensor is within the rated voltage range.
PAGE 21
F502-EN2-04.book Seite 63 Dienstag, 26. Juli 2005 5:48 17 Mounting Sensor Mounting If the Sensor fails to provide stable detection due to the shape of bottles, adjust the location and inclination of the Sensor. Inspection and Maintenance Sensing object Moving direction Sensing object Sensing object Moving direction Cleaning Never use paint thinners or other organic solvents to clean the surface of the product.
PAGE 22
F502-EN2-04.book Seite 64 Dienstag, 26. Juli 2005 5:48 17 Dimensions (Unit: mm) Sensors Through-beam Pre-wired E3Z-T61 E3Z-T81 E3Z-T61A 8 Emitter 10.8 10.4 Power indicator (orange) 7.2 17 Lens Optical axis 18 2.1 Connector relay models E3Z-T61-M1J Specifications 1 +V Terminal No. Specifications 12 +V --23 --- 0V 3 0V Vinyl-insulated round cable 44 --- --with two conductors, 4 dia.; Note: Terminal 2 and 4 standard length: 0.3 m B, Dareare not free used. terminals. 4 1 31 25.4 11 Terminal No.
PAGE 23
F502-EN2-04.book Seite 65 Dienstag, 26. Juli 2005 5:48 17 Diffuse-reflective Pre-wired E3Z-D61 E3Z-D81 E3Z-D62 E3Z-D82 E3Z-L61 E3Z-L81 Retroreflective Models Connector type E3Z-B66 E3Z-B67 E3Z-B86 E3Z-B87 E3Z-R66 E3Z-R86 Diffuse-reflective Connector type E3Z-D66 E3Z-D86 E3Z-D67 E3Z-D87 E3Z-L66 E3Z-L86 20 12.45 8.8 Operation indicator (orange) E3Z Retroreflective Models Pre-wired E3Z-B61 E3Z-B62 E3Z-B81 E3Z-B82 E3Z-R61 E3Z-R81 4.3 3.2 10.8 10.
PAGE 24
F502-EN2-04.book Seite 66 Dienstag, 26. Juli 2005 5:48 17 Distance-settable Models Connector type E3Z-LS66 E3Z-LS86 20 12.7 8 Operation indicator (orange) 4.3 10.8 10.4 Set distance adjuster Operation selector Stability indicator (green) 17 2 lenses (7 dia.) Receiver Optical axis 2.1 18 4 4 31 25.4 13.5 Emitter 10.4 Two, M3 9.75 Grooved-type Models E3Z-G Optical axis S1 * Optical axis S2 * 50 35 9 19 25 40 Two, 4.5 dia. Junction connector (E3Z-G6#-M3J) "4-dia.