Datasheet

2 Multi voltage photoelectric sensor
Accessories
Slit
Reflectors
Note 1. For the complete overview of available reflectors please refer to www.industrial.omron.eu or to the accessory datasheet E26E.
2. Values in brackets are the minimum required distance between the Sensor and Reflector.
Mounting Bracket
Note: If a Through-beam Model is used, order two Mounting Brackets for the Emitter and Receiver respectively.
Slit width Sensing distance Minimum sensing
object (typical)
Model Quantity Remarks
1 mm × 20 mm 1.2 m 1 mm dia. E39-S39 1 Slit each for Emitter
and Receiver (2 Slits
total )
(Seal-type long slit)
Can be used with the
Through-beam Model
E3JM-10@4(T).
Name Sensing distance (typical) Model Quantity Remarks
Reflectors 4 m (rated value) E39-R1 1 Provided with the E3JM-R4@4(T).
Small Reflectors 3.5 m E39-R3 1 ---
Tape Reflectors 1 m (200 mm) (See note 2.) E39-RS1 1 ---
1.6 m (200 mm) (See note
2.)
E39-RS2 1
2 m (200 mm) (See note 2.) E39-RS3 1
Appearance Model Quantity Remarks
E39-L53 1 Provided with the E3JM