Datasheet

E3F2
E3F2
4
 AC MODELS
Part number E3F2-3Z1, E3F2-3Z2 E3F2-R2Z1, E3F2-R2Z2 E3F2-DS10Z1N, E3F2-DS10Z2N
Method of detection Through-beam Retroreflective Diffuse
Sensing range 3 m (9.84 ft) 2 m (6.56 ft) 10 cm (3.94 in)
Standard target 11 mm 56 mm 10 x 10 cm 90% Kodak white card
Supply voltage 24–240 VAC ±10%, 50/60 Hz
Output SCR 200 mA max.; residual voltage 5 V max. at 200 mA
Power consumption 10 mA max. 5 mA max.
Response time 30 ms max.
Stabilization on Powerup 100 ms
Ambient temperature
Operating –25°C to 55°C (–13°F to 131°F) with no icing
Storage –30°C to 70°C (–22°F to 158°F)
Ambient light immunity Incandescent: 3,000  x; sunlight: 10,000 x
Relative humidity
Operating 35% to 85% RH, no condensation
y
Storage 35% to 95% RH
Insulation resistance 20 MΩ at 500 VDC between current carrying parts and case
Dielectric strength 1,500 VAC, 50/60 Hz for 1 min. between current carrying parts and case
Vibration 10 to 55 Hz 1.5 mm double amplitude 2 hrs each in X, Y, Z axes
Shock 500 m/s
2
(approx. 50 G)
Enclosure IP66, NEMA 1, 2, 4 (indoor)
Light source Infrared LED
Indicators Power and light received LEDs
Sensitivity adjustment Fixed
Operation mode Light-ON (Z1 models) or Dark-ON (Z2 models)
Weight
Pre-leaded models 110 g
g
Connector models 55 g
Circuit protection —
Materials
Lens Acrylate resin
Housing Plastic ABS
Cable sheath PVC