Datasheet

ManualsBrandsOmron Industrial Automation ManualsOptical SensorsDiffuse Reflective Sensor 300mm PNP



M18 Cylindrical Photoelectric E3F2

Threaded Cylindrical M18 Size

Sensors with Built-in Amplifier



Rugged stainless and nickel plated

brass versions

 Chemical resistant, ABS resin case type

 Polarized models

 Compact and space-saving

 Long detection distance (7 m)

 DC switching types with connectors for

easy maintenance

 Wide operating voltage range

(10 to 30 VDC, or 24 to 240 VAC)

 Short-circuit and reverse connection

protection (DC switching type)

 UL, CSA listed and CE marked

Ordering Information

 SENSORS

Supply Type Connection Output Range Housing Part number

AC Through-beam Pre-leaded

Light-On

3 m

Plastic E3F2-3Z1

Dark-On Plastic E3F2-3Z2

Retroreflective,

Nlid

Light-On

2 m

Plastic E3F2-R2Z1

Non-polarized

Dark-On Plastic E3F2-R2Z2

Diffuse

Light-On

100 mm

Plastic E3F2-DS10Z1N

Dark-On Plastic E3F2-DS10Z2N

DC Through-beam Connector NPN 7 m

Plastic E3F2-7C4-P1

NPB E3F2-7C4-M1–C

SS E3F2-7C4-M1-S

PNP

Plastic E3F2-7B4-P1

NPB E3F2-7B4-M1-C

SS E3F2-7B4-M1-S

Diffuse NPN 10 cm

NPB E3F2-DS10C4-M1-C

SS E3F2-DS10C4-M1-S

Plastic E3F2-DS10C4-P1

30 cm Plastic E3F2-DS30C4-P1

Note: NPB = Nickel plated brass; SS = Stainless steel

(This table continues on the next page.)

Summary of content (14 pages)

PAGE 1
M18 Cylindrical Photoelectric E3F2 Threaded Cylindrical M18 Size Sensors with Built-in Amplifier Rugged stainless and nickel plated brass versions Chemical resistant, ABS resin case type Polarized models Compact and space-saving Long detection distance (7 m) DC switching types with connectors for easy maintenance Wide operating voltage range (10 to 30 VDC, or 24 to 240 VAC) Short-circuit and reverse connection protection (DC switching type) UL, CSA listed and CE marked Ordering
PAGE 2
E3F2 E3F2 Ordering Information Table – continued from previous page Supply Type Connection Output Range Housing Part number DC Diffuse Connector PNP 10 cm NPB E3F2-DS10B4-M1-C SS E3F2-DS10B4-M1-S Plastic E3F2-DS10B4-P1 30 cm Plastic E3F2-DS30B4-P1 2m Plastic E3F2-R2C4-P1 Retroreflective,, N Non-polarized l i d NPN PNP Plastic E3F2-R2B4-P1 Retroreflective,, P l i d Polarized NPN NPB E3F2-R2RC4-M1-C SS E3F2-R2RC4-M1-S NPB E3F2-R2RB4-M1-C SS E3F2-R2RB4-M1-S Plastic E3F2-
PAGE 3
E3F2 E3F2 REPLACEMENT PARTS Description Part number Reflector for E3F2-R2 4 retroreflective sensors E39-R1 Two plastic M18 mounting nuts E3F-PHWS Specifications DC SWITCHING MODELS Part number E3F2-7C4- , E3F2-7B4- E3F2-R2C4- , E3F2-R2B4- Method of detection Through-beam g Retroreflective E3F2-R2RC4- , E3F2-R2RB4- E3F2-DS10C4- , E3F2-DS30C4- , E3F2-DS10B4- E3F2-DS30B4- Diffuse Non-polarized Polarized 2 m (6.56 ft) Sensing range 7 m (22.96 ft) 2 m (6.
PAGE 4
E3F2 E3F2 AC MODELS Part number E3F2-3Z1, E3F2-3Z2 E3F2-R2Z1, E3F2-R2Z2 E3F2-DS10Z1N, E3F2-DS10Z2N Method of detection Through-beam Retroreflective Diffuse Sensing range 3 m (9.84 ft) 2 m (6.56 ft) 10 cm (3.94 in) Standard target 11 mm 56 mm 10 x 10 cm 90% Kodak white card Supply voltage 24–240 VAC ±10%, 50/60 Hz Output SCR 200 mA max.; residual voltage 5 V max. at 200 mA Power consumption 10 mA max. Response time 30 ms max. 5 mA max.
PAGE 5
E3F2 E3F2 Engineering Data OPERATING RANGE (TYPICAL) E3F2-3 - (Through-beam) E3F2-R2 - (Retroreflective) Operating position Y (cm) Operating position Y (cm) Y X Y X Distance X (m) Distance X (m) E3F2-3 and E39-RU1 (Right angle adapter) E3F2-R2 and E39-RU1 (Right angle adapter) 80 150 60 100 40 50 20 0 0 0 05 1 15 2 25 3 35 4 45 05 0 1 15 2 25 3 -20 -50 -40 -100 -60 -150 -80 Distance X (m) Distance X (m) E3F2-R2R -4 (Polarized, retroreflective) 40 10 30
PAGE 6
E3F2 E3F2 E3F2-DS10 4-N E3F2-DS10 4-P1 E3F2-DS30 - (Diffuse) White paper (5 x 5 cm) Y 10 X 5 0 –5 –10 –15 0 20 40 60 80 White paper (10 x 10 cm) Y Operating position Y (cm) Operating position Y (mm) 15 100 X 120 Distance X (mm) Distance X (cm) EXCESS GAIN VS.
PAGE 7
E3F2 E3F2 E3F2-7 4- (Through beam) E3F2-R2R 4- (Polarized retroreflective) Excess gain ratio Excess gain ratio 100 10 1 0,1 0 2 4 6 8 10 12 14 Distance (m) Distance (m) EXCESS GAIN VS.
PAGE 8
E3F2 E3F2 Operation OUTPUT CIRCUITS Configuration Model Connection method Output transistor NPN pre-wired E3F2-7C4 E3F2-7C4-M E3F2-7C4-C E3F2-7C4-S E3F2-R2C4 E3F2-R2RC4-M E3F2-R2RC4-C E3F2-R2RC4-S E3F2-DS10C4-N E3F2-DS10C4-M E3F2-DS10C4-C E3F2 DS10C4 C E3F2 DS10C4 S E3F2-DS10C4-S E3F2-DS30C4 E3F2-DS30C4-M E3F2-DS30C4-S Connect the pink and brown wires or open the pink wire. ON when light is incident.
PAGE 9
E3F2 E3F2 Operation Table – continued from previous page Configuration Model Connection method Output transistor PNP connector E3F2-7B4-P1 E3F2-7B4-M1-M E3F2-7B4-M1-C E3F2-7B4-M1-S E3F2-R2B4-P1 E3F2-R2RB4-M1 -M E3F2-R2RB4-M1 -C E3F2-R2RB4-M1 -S E3F2-DS10B4P1 E3F2-DS10B4M1-M E3F2-DS10B4M1-C E3F2-DS10B4M1-S E3F2-DS30B4P1 E3F2-DS30B4M1-M E3F2-DS30B4M1-S Connect the pink and brown wires or open the pink wire. ON when light is incident.
PAGE 10
E3F2 E3F2 Dimensions Unit: mm (inch) PRE-LEADED DC MODELS 65 (2.56) 49.3 (1.94) 42.3 (1.67) 37 (1.46) 24 (0.94) Receiver 5 dia. 6.2 (0.24) Emitter (or receiver on through-beam) E3F2-7 4- E3F2-DS10 4- E3F2-DS30 4 E3F2-R2 4 E3F2-R2R 4- 22 (0.87) 8 (0.31) M18 x 1 Diffuse and Retroreflective (DC) Polyvinyl chloride-covered cord, 4-mm dia. (18/0.12), 4-conductor (brown, blue, black, and pink) Standard length: 2 m Through-beam (DC) 16.8 dia. Emitter: Polyvinyl chloride-covered cord, 4-mm dia.
PAGE 11
E3F2 E3F2 AC MODELS E3F2-3Z1, E3F2-3Z2 E3F2-R2Z1, E3F2-R2Z2 E3F2-DS10Z1-N, E3F2-DS10Z2-N Through-beam (AC) Emitter: Polyvinyl chloride-covered cord, 4-mm dia. (11/0.16), 2-conductor (brown and blue) Standard length: 2 m Receiver: Polyvinyl chloride-covered cord, 4-mm dia. (11/0.16), 3-conductor (brown, blue, and black) Standard length: 2 m Diffuse and Retroreflective (AC) Vinyl insulated round cord, 4-mm dia. (11/0.16), 3-conductor (brown, blue, and black) Standard length: 2 m 90 (3.54) 24 (0.
PAGE 12
E3F2 E3F2 E39-RSA Reflector E39-RSB Reflector 35 (1.38) 33 (1.30) 10 (0.39) 40 (1.57) 38 (1.50) 0.7 (0.03) 0.7 (0.03) 8 Four, R1 33 (1.30) Adhesive Reflecting tape surface 35 (1.38) Adhesive tape Four, R1 E39-RU1 Right Angle Adapter Reflecting surface 4.0 (0.16) 10.6 (0.42) 30 TYP. 6x2 mm 16.0 (0.63) 15.7 (0.62) 23.9 (0.94) 8.9 (0.35) 18.5 (0.73) 3.3 (0.13) 3.0 (0.12) 20.5 (0.81) 45° 6.1 (0.24) 28.7 (1.13) 9.2 (0.36) 14.1 (0.56) 5-40 SUS set screw 45°x0.
PAGE 13
E3F2 E3F2 Y92E-B18 Mounting Bracket 32±0.2 (1.26±0.008) 17 (0.67) max. 47 (1.85) max. 7 (0.28) Note: 30 (1.18) 18 (0.71) dia. Hexagonal nut: M5 x 32 Material: plastic E39-F31 Lens Cap Glass plate 4 (0.16) max. 20 (0.79) dia. Metal rim E3F2 Gasket OPTIONAL CONNECTOR CABLES Straight Connector Cable Right Angle Connector Cable Y96E-44SD Y96E-44RD 14.67 (0.58) 26.65 (1.05) 34.92 (1.37) 14.67 (0.
PAGE 14
E3F2 E3F2 Precautions When using the Photoelectric Sensor at temperatures over 45°C, the load current must be within the rated value shown in the figure below. 200 Load current (mA) If the input/output lines of the Photoelectric Sensor are placed in the same conduit or duct as power lines or high-voltage lines, the Photoelectric Sensor could be induced to malfunction, or even be damaged, by electrical noise. Separate the wiring, or use shielded lines as input/output lines to the Photoelectric Sensor.