Datasheet

E3F1
2
Sensor I/O connectors
Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.
Specifications
Sensor Size Cable Appearance Cable type Model
M12 connector types M12 Standard
2 m
4-wire
XS2F-M12PVC4S2M-EU
5 m XS2F-M12PVC4S5M-EU
2 m XS2F-M12PVC4A2M-EU
5 m XS2F-M12PVC4A5M-EU
Sensing method Through-beam Retro-reflective Diffuse-reflective
Model
NPN
output
Pre-wired E3F1-TN11 2M E3F1-RN11 2M E3F1-DN11 2M E3F1-DN12 2M
M12 Connector E3F1-TN21 E3F1-RN21 E3F1-DN21 E3F1-DN22
PNP
output
Pre-wired E3F1-TP11 2M E3F1-RP11 2M E3F1-DP11 2M E3F1-DP12 2M
Item M12 Connector E3F1-TP21 E3F1-RP21 E3F1-DP21 E3F1-DP22
Sensing distance 15 m
0.1 to 3 m
(with E39-R1S)
100 mm
(white paper:
300  300 mm)
300 mm
(white paper:
300  300 mm)
Spot diameter (typical) ——
40  45 mm
Sensing distance
of 100 mm
40  50 mm
Sensing distance
of 300 mm
Directional angle 2° min. 2° min. — —
Light source (wavelength) Red LED (624 nm)
Power supply voltage 10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
Current consumption
40 mA max.
(Emitter 25 mA max.
Receiver 15 mA max.)
25 mA max.
Control output
NPN/PNP (open collector)
Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max.
Operation mode Light-ON/Dark-ON selectable by wiring
Indicator
Operation indicator (orange)
Stability indicator (green)
Power indicator (green): only Emitter of Through-beam
Protection circuits
Reversed power supply polarity protection, Output short-circuit protection and Reversed output po-
larity protection
Response time 0.5 ms
Sensitivity adjustment One-turn adjuster
Ambient temperature range Operating: -25 to 55°C/ Storage: -30 to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35 to 85%RH/ Storage: 35 to 95%RH (with no condensation)
Degree of protection IEC: IP66
Weight
(packed
state/only
sensor)
Pre-wired cable (2M)
Approx. 110 g/
Approx. 50 g,
respectively
Approx. 60 g/ Approx. 50 g
Connector
Approx. 30 g/
Approx. 10 g,
respectively
Approx. 20 g/ Approx. 10 g
Material
Case ABS
Lens and Display PMMA
Adjuster POM
Nut ABS
Accessories
Instruction sheet
M18 nuts (4 pcs)
Instruction sheet
M18 nuts (2 pcs)
Straight
Angle