Datasheet

E3G
E3G
16
Precautions
Do not ignore the following items that are essential for securing
safety
during Sensor operation.
• Do not use the Sensor in locations with explosive or flammable
gas.
• Do not use the Sensor in the water or electrically conductive
solutions.
• Do not disassemble, repair , or modify the product.
• Make sure that the power supply specifications, such as AC or
DC, are correct.
• Do not apply voltage or current exceeding the rated ranges.
• Do not make mistakes in wiring, such as mistakes in polarity .
• Be sure to connect the load correctly .
• Do not short-circuit the load terminals.
OMRON Corporation
Industrial Sensors Division
Sensing Devices and Components Division H.Q.
28th Fl., Crystal T ower Bldg.,
1-2-27, Shiromi, Chuo-ku,
Osaka 540-6028 Japan
Phone: [phone] Fax: [phone]
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. T o convert grams into ounces, multiply by 0.03527.
Cat. No. E278-E1-2 In the interest of product improvement, specifications are subject to change without notice.
Printed in Japan
1298-3M (0998) a