Datasheet

E3S-CR67/62
E3S-CR67/62
Specifications
Part number E3S-CR67 E3S-CR62
Light source Red LED (670 nm)
Sensing distance
w/E39-R6 reflector (See Note.) 250 mm
g
w/E39-R1 reflector 1 meter
Supply voltage 10 to 30 VDC ripple 10% max.
Current consumption 40 mA
Output NPN and PNP, switch selectable
Response time 1mson,1msoff
Indicators Red: light received, Green: stability
Circuit protection Reverse polarity and short circuit protection
Ambient light immunity
Incandescent: 5,000 Lux.
g
y
Sunlight: 10,000 Lux.
Mutual Interference Protection (See Note 2.)
Ambient temperature Operating: --25
°
Cto55
°
C(--13
°
F to 131
°
F) no icing
Relative humidity Operating: 35% to 85% R.H.
Insulation resistance 20 m ohms min. (at 500 VDC)
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min.
Vibration 10--2000 Hz, 1.5 mm double amplitude, or 300 m/s
2
(approx. 30G
for 0.6 hours in X, Y, Z axis)
Shock resistance 1m/s
2
(approx, 100 G) 3 times, X, Y, Z axis
Enclosure rating IP67 NEMA 6P
Connection M12 quick disconnect 2-m attached cable
Sensor type Retroreflective
Sensitivity adjustment 2-turn potentiometer
Object size 30 mm dia. x 150 long glass tube, 1.8 mm wall thickness
Capacity 30 VDC, 100 mA, residual voltage, NPN 1.2V, PNP 2.0V
Mode L.O. and D.O., switch selectable
Case material Die-cast zinc
Panel Sulfonated polyether
Lens Acrylic
Bracket Stainless steel
Weight 80 g 115 g
Cable bending radius —— 25 mm min.
Note: 1. Included with sensor.
2. Mutual Interference Protection: Allows sensor to filter out interfering light sources from nearby sensors and avoid interference.