Datasheet
E3G
E3G
11
M12 Connector
Be sure to connect or disconnect the M12 connector after turning
OFF
the Sensor
.
Be
sure to hold the connector cover when connecting or
disconnect
-
ing
the M12 connector
.
Secure the M12 connector by hand. Do not use any pliers, other-
wise
the connector may be damaged.
If
the M12 connector is not connected securely
, the proper degree of
protection of the Sensor may not be maintained or the connector
may
be disconnected due to vibration.
W
ater Resistance
Do not use the product in water
, in rain, or outdoors.
Tighten
the operation cover screws and terminal block cover screws
to
a torque of 0.3 to 0.5 N
S
m in order to ensure water resistivity
.
Maintenance and Inspection
Cleaning
Paint thinner damages the casing of the E3G. Do not apply paint
thinner
to clean the E3G.
Others
Operating Environment
Do
not install the E3G in the following locations, otherwise the E3G
may
malfunction.
• Places with excessive dust.
• Places with corrosive gases.
• Locations
directly exposed
to sprays of water
, oil, or chemicals.
• Locations where the product is directly exposed to vibration or
shock.