Datasheet

248
E32
Fiber sensor heads
Special application fiber sensor heads
For a wide range of special applications, the task optimised fiber heads provide best
fitting sensing performance and adaption to environmental requirements.
• Detection of special objects (liquids, transparent foils, etc.)
• Fiber heads ideal for colour mark detection
• Fiber heads optimised for special tasks (wafer mapping, hot reflective surface
detection, etc.)
Ordering information
Sensor type Size Sensing distance (in mm)
*1
*1
Sensing distance measured with E3X-DA-S family in standard mode. In high resolution mode the sensing distance is approx. 30% higher.
Comment Order code
Fork shape 36x24x8 mm 10 – E32-G14
Wafer mapping dia 3 1900 – E32-T22S
dia 3 1300 – E32-T24S
dia 3 890 – E32-A03 2M
dia 2 340 – E32-A04 2M
Liquid level sensor dia 6 liquid contact Liquid level contact E32-D82F1 4M
15x23.5x5 mm tube contact Liquid level detection through transparent
tube or container
E32-D36T 2M
Glass detection in wet
processes
38.5x39x17.5 mm 8 to 20
(recommended: 11 mm)
- Heat resistant up to 85°C
- Recommended usage with special
amplifier E3X-DA_TG-S
E32-L11FS 2M
Label detection 20x20x5 mm 7.2 – E32-L25L
18x20x4 mm 4 – E32-L24L
34x25x8 mm 2.4 Very precise spot
(detection accuracy 100 μm)
E32-EL24-1 2M
Colour / print mark detection
*2
*2
With amplifier E3X-DAC-S
M6 300 Recommended for standard colour and
colour mark detection
E32-CC200 2M
23x20x9 mm 35 Recommended for higher precision colour
and colour mark detection
E32-A09 2M
M3 20 Recommended for very precise colour
mark detection
E32-EC31 2M
Transparent foil detection M4 depends on application With amplifier E3X-DA_ -S and
powertuning functionality
E32-ET11R + E39-F1
36x24x8 mm 10 - Fork shape for simplified mounting
- Only with amplifier E3X-DAC_ -S
E32-G14
Detection of hot
reflective surfaces
36x18x5.5 mm 18 - Heat resistant up to 300°C
- Limited reflective for accurate
detection of shiny surfaces
- Wide beam for tilt resistance
tolerance of object surface
E32-L66 2M