Brochure

E3X-HD Fiber amplifier
28
Specifications
Item
Type Standard models For Communications
Unit
Model E3X-HD11 E3X-HD41 E3X-HD6 E3X-HD8 E3X-HD14 E3X-HD44 E3X-HD0
Connection method Pre-wired Wire-saving connector M8-4pin connector Communications
unit connector
Control output NPN output PNP output NPN output PNP output NPN output PNP output –
Light source (wavelength) Red, 4-element LED (625 nm)
Power supply voltage 12 to 24 VDC±10%, ripple (p-p) 10% max.
Power consumption Normal Mode: 720 mW max. (Current consumption: 30 mA max. at 24 VDC, 60 mA max. at 12 VDC.)
Power Saving Eco Mode: 530 mW max. (Current consumption: 22 mA max. at 24 VDC, 44 mA max. at 12 VDC.)
Control output Load power supply voltage: 26.4 VDC max., open-collector output (Varies with the model depending on
output is PNP or NPN.)Load current: 50 mA max. (residual voltage: 2 V max.), OFF current: 0.5 mA max.
–
Response time
Super-high-speed Mode
(SHS)
Operate or reset: 50 s (NPN models) or 55 s (PNP models)
High-speed Mode (HS) Operate or reset: 250 µs
Standard Mode (STND) Operate or reset: 1 ms
Giga-power Mode
(GIGA)
Operate or reset: 1 ms
Mutual interference
prevention
Possible for up to 10 units
Maximum
connectable Units
16 units with E3X-CRT:
16 units
with E3X-ECT:
30 units