Brochure

30
E3X-SD Fiber amplifier
Single display digital fiber amplifier
E3X-SD allows easy one button setting and provide the best value performance ratio
for standard applications.
• Auto-teaching during machine operation
• 2-point teaching within a few seconds
• Simple threshold adjustment with up/down keys
Ordering information
Fiber amplifier connectors
Specifications
Easy operation by ergonomic buttons
Auto-teaching 2-point teaching
Item Order code
NPN output PNP output
Pre-wired
E3X-SD21 2M E3X-SD51 2M
Fiber amplifier connector
*1
*1
Order connector separately. For M8 connector models see E3X-HD.
E3X-SD7 E3X-SD9
Shape Type Comment Order code
Fiber amplifier connector 2 m PVC cable
E3X-CN11
30 cm PVC cable with M12 plug connector (4 pin)
E3X-CN21-M1J 0.3M
30 cm PVC cable with M8 plug connector (4 pin)
E3X-CN21-M3J-2 0.3M
Item E3X-SD
Light source (wave length) Red, 4-element LED (625 nm)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% max.
Protective circuits Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention
Response time Operation or reset: 200 µs max
Sensitivity setting Teaching and digital up/down keys
Functions Auto power control High-speed control method for emission current
Mutual interference prevention Optical communication sync. possible for up to 5 units
Digital displays Incident level or threshold
Degree of protection IEC 60529 IP50 (with protective cover attached)
Push the TEACH button for min. 3 seconds while objects passing
Workpiece
Workpiece Workpiece
Remove a workpiece and press
the TEACH button.
Position a workpiece and press
the TEACH button.
Workpiece