Brochure

26
E39/E32 Fiber accessories
Accessories
Shape Type Comment Order code
Focal lens – Extends sensing distance by more than 500%
– For M4 Through beam fibers E32-TC200, E32-ET11R, E32-T11 (fits M2.6 thread)
– 2 pcs per set
E39-F1
Focal lens (side view) – For M4 through beam fibers E32-TC200, E32-ET11R, E32-T11,
E32-T61-S, E32-T81R-S (fits M2.6 thread)
– Temperature range –40 to 200°C
– 2 pcs per set
E39-F2
Focal lens (variable) – For precision detection with E32-D32, E32-EC41
E39-F3A
Focal lens – For precision detection with E32-EC41
E39-F3A-5
– For precision detection with E32-EC41
E39-F3B
– For precision detection with M6 coaxial diffuse reflective fibers (e.g. E32-CC200)
E39-F18
Focal lens (side view, variable) – For precision detection with E32-EC31
E39-EF51
Focal lens (heat resistant) – Extends sensing distance by more than 500%
– For M4 through beam fibers E32-ET51, E32-T61, E32-T61-S,
E32-T81R, E32-T81R-S (fits M4 thread)
– Temperature range –60 to 350°C
– 2 pcs per set
E39-EF1-37-2
E39-F16
Focal lens (vacuum resistant,
heat resistant)
– Fits E32-T51V and E32-T54V (fits M2.6 thread)
– 2 units per set
– Heat resistant up to 120°C
E39-F1V
Fiber cutter – Included in applicable fiber
E39-F4
Thin fiber attachment – Amplifier adapter for thin fibers
– Included in applicable fiber (2 sets)
E39-F9
Sleeve bender – For E32-TC200B(4)
– For E32-TC200F(4)
– For E32-DC200F(4)
E39-F11
Single fiber extension
connector
– Fiber extension connector for 2.2 mm dia standard fibers
–One unit
E39-F10
Dual fiber extension connector – For fibers with dia 2.2
E39-F13
–For fiber with dia 1.0
E39-F14
– For fibers with dia between 1.0 and 2.2
E39-F15
Protective spiral tube
*1
*1
Protective spiral tubes with 0.5 m length are available. Add '5' to order code … e.g. E39-F32A5
– For M3 diffuse type sensors
–Length 1 m
E39-F32A
– For M3 through beam type sensors
–Length 1 m
E39-F32B
– For M4 through beam type sensors
–Length 1 m
E39-F32C
– For M6 diffuse type sensors
–Length 1 m
E39-F32D
Fiber on roll
*2
*2
Fiber length 100 m on a roll – cut to length
– Dia 2.2 mm
– Standard monocore, 10 mm bending radius
– –40 to 80°C
E32-E01 100M
– Dia 1.1 mm
– Standard monocore, 15 mm bending radius
– –40 to 80°C
E32-E02 100M
– Dia 2.2 mm
– High flex multicore, 1 mm bending radius
– –40 to 80°C
E32-E01R 100M
– Dia 1.1 mm
– High flex multicore, 1 mm bending radius
– –40 to 80°C
E32-E02R 100M
– Dia 2.2 mm
– High temperature monocore, 20 mm bending radius
– –60 to 150°C
E32-E05 100M