FIBER-OPTIC SENSORS High precision in small spaces » Long operational life » Wide portfolio range » Easy to install and set up
Precision and performance you can rely on For over 30 years OMRON has been a supplier of fiber optic solutions to leading manufacturers, especially in the semiconductor, the consumer electronics and the car electronics industry, as well as for food packaging and small plastic parts production. Today, already with over 500 standard, application or customer specific fiber optic sensors, we take pride in working together with you to ensure the best performance fit for your application.
Performance that makes a difference Long operational lifetime Ensuring that products do not fail during production and require only minimal service attention enhances productivity and reduces maintenance costs. 2. Preventing fiber breakage • Housing construction preventing protruding cables (e.g. square shape, side view models) • High flex fibers with 1 mm bending radius for close wall mounting • Robot fibers tested with more than one million bending cycles 1.
The little extra For your advanced application requirements, adaption to specific settings, or special solutions, our sales, application and engineering teams near you will provide additional service and support....
Choose the performance you need STEP 1: The fiber optic sensor heads General application me d fas t 8 slow very fast Standard cylindrical Square shape Miniature Long distance Enhanced environment resistance 400 °C 40 16 °C 0 Chemical resistant Heat resistant Vacuum resistant Special objects or installations d fas t very fast slow me Robotic usage Precision detection Area monitoring Special detection 400 °C 26 40 Accessories 20 °C 0 d ftubes, ast Lenses, protective reflectors,
Selection table Fiber sensor heads Type Cylindrical Square shape Miniature Longer distance Chemical resistant Model E32 standard cylindrical E32 square shape E32 miniature E32 longer distance E32 chemical resistant Key features • Standard and high-flex fibers • Sizes M3 to M6 • 3 or 4 mm thin housing • Models in X,Y or Z-axis • Direct mounting without bracket • Sizes from dia 500 μm to 3 mm • Bendable sleeves • Built in focal lenses • Fluoroplastic cover or coating Through-beam 1,550 mm
Fiber optic sensors and amplifiers Heat resistant Vacuum resistant Robot applications Precision detection Area monitoring Special application E32 heat resistant E32 vacuum resistant E32 robot E32 precision detection E32 area monitoring E32 special • Heat resistant up to 400°C • Leakage rate of 1 × 10-10 Pa*m3/s max • Free moving multicore fibers • Detection accuracy for >1 Mio bending cycles up to 100 μm • Coaxial fibers • Adjustable focal points • Area monitoring up to 70 mm • Detection of
E32 Standard cylindrical Fiber sensor heads Standard cylindrical fiber sensor heads The standard cylindrical fiber optic sensor heads provide reliable object detection, easy installation and long sensor lifetime for all general applications.
E32 Standard cylindrical Fiber sensor heads Standard E32-_C200 E32-_C220 Permissible bending radius R25 Cut to length Yes High Flex E32-D14L E32-D211 E32-R21 R10 Ambient temperature –40°C to 70°C Material Head Brass-nickel plated Fiber PMMA Sheath Polyethylene coating Degree of protection E32-_C200E Stainless steel Brass-nickel plated E32-_R E32-T11N E32-D11N E32-D14LR E32-D211R R1 Stainless steel Plastic (ABS) Brass-nickel plated E32-LR11NP R2 Stainless steel Brass-nickel p
E32 Square shape Fiber sensor heads Square shape fiber sensor heads The fiber heads in square shaped housing provide fast and easy installation on flat surfaces.
E32 Square shape Fiber sensor heads Item Standard High flex E32-A03_ Permissible bending radius R25 R10 Cut to length Yes Material E32-A04_ E32-E E32-_15_R R1 1 E32-_15 Ambient temperature Fiber – general Specifications –40°C to 70°C Head Aluminium Fiber PMMA Sheath Polyethylene coating Degree of protection Brass-nickel plated IEC 60529 IP67 Stainless steel Aluminium PVC coating IEC 60529 IP50 IEC 60529 IP67 90° Space saving and fast mounting without additional brackets Pr
E32 Miniature Fiber sensor heads Miniature fiber sensor heads The miniature fiber heads provide high accuracy in smallest spaces and reliable detection of minute objects.
Specifications Item Standard High-flex E32-DC200B E32-T14L E32-T12 E32-TC200B Permissible bending radius R25 Cut to length Yes Ambient temperature –40°C to 70°C Material Head Brass-nickel plated Fiber PMMA Sheath Polyethylene coating Degree of protection Stainless steel E32-D32 E32-D22 E32-D24 E32-A04 E32-T222 E32-DC200F E32-TC200F E32-T22 E32-T24 E32-D32R E32-D33 E32-D331 R10 R4 Brass-nickel plated Bendable metal sleeves for precision positioning of sensors after installation Stai
E32 Longer distance Fiber sensor heads Longer distance fiber sensor heads With built-in focal lenses the longer distance fiber heads provide enhanced operational stability in dusty environments or long distance applications • Sensing distance up to 20 m • Built-in focal lens • Sizes from dia 2 mm to M14 • Easy installation - no need to attach auxiliary lenses Ordering information Sensor type Size Sensing distance (in mm)*1 Standard fiber easy t moun Order code High-flex fiber Standard fiber High-f
E32 Longer distance Fiber sensor heads Item Fiber – general Specifications Through-beam E32-LT11N E32-LT11 Permissible bending radius R25 R2 R25 Cut to length Yes E32-T12L E32-TC200A E32-LT11R E32-T22L R1 R10 1 E32-T17L/ E32-T14 Ambient temperature –40°C to 70°C Material Head ABS Fiber PMMA Sheath Polyethylene coating Brass-nickel plated Degree of protection IP67 IP50 Item Retro-reflective Diffuse-reflective Stainless steel IP67 IP50 IP67 E32-R16 E32-D16 E32-LD11N
E32 Chemical resistant Fiber sensor heads Chemical resistant fiber sensor heads The chemical resistant fibers provide long sensor lifetime in areas with frequent cleaning, usage of chemicals and higher temperatures.
E32 Heat resistant Fiber sensor heads Heat resistant fiber sensor heads 2 Fibers – env.
E32 Heat resistant Fiber sensor heads Specifications Item –40°C to 150°C –40°C to 100°C –40°C to 150°C –40°C to 200°C –40°C to 300°C –60°C to 350°C –40°C to 400°C E32-_51 E32-D51R/ T51R E32-T54 E32-_ 81_ E32-T84_ E32-A09H2 E32-_ 61_ E32-D73_ Permissible bending radius (in mm) R35 R2 R35 R10 R25 Cut to length Yes Material Brass-nickel plated Stainless steel Aluminium Fiber PMMA Acrylate resin PMMA Sheath Fluoro resin Polyurethane Fluoro resin resin IEC 60529 IP67 IEC 6052
E32 Vacuum resistant Fiber sensor heads Vacuum resistant fiber sensor heads 2 Fibers – env. resistance For applications in cleanest and hot environments the vacuum resistant fibers and connecting flanges provide long operational lifetime and vacuum integrity.
E32 Robot application Fiber sensor heads Robot application fiber sensor heads For applications on frequently or fast moving parts, the robot fibers reduce the risk of fiber breakage with a guaranteed operational life of more than 1 million bending cycles • Free moving multicore fibers for > 1 mio bending cycles • Square shapes for easy surface installation • Cylindrical sizes from dia 1.
E32 Precision detection Fiber sensor heads Precision detection fiber sensor heads Highest precision in design and manufacturing of the fibers and focal lenses ensure superior beam and spot accuracy allowing the detection of the smallest objects and height differences, even down to 100 μm.
E32 Precision detection Fiber sensor heads Specifications Item Through-beam Diffuse reflective (coaxial) Limited reflective E32-T22S E32-A03 E32-A04 E32-C11N E32-C31N E32-C21N E32-CC200 E32-C42 E32-D32/-D32L E32-C31/-C41 E32-EL24-1 E32-L24L E32-L25L E32-L25 Permissable bending radius R10 R1 R10 R4 R2 R25 R10 R25 Cut to length Yes Ambient temperature –40°C to 70°C Materia Head l Brass-nickel plated Stainless steel Brass-nickel plated Fiber PMMA Sheath PVC coating Polyethylen
E32 Area monitoring Lightcurtains and area sensors Area monitoring fiber sensor heads When mounting space is crucial or the objects are very small, the area monitoring fibers provide a reliable object detection even when the object position varies within the monitored range. In combination with the window monitoring function or the serial transmission of the received light level values of the fiber amplifiers, simple height comparison or measuring applications can be realized.
E32 Special application Fiber sensor heads Special application fiber sensor heads For a wide range of special applications, the task optimised fiber heads provide best fitting sensing performance and adaption to environmental requirements. • Detection of special objects (liquids, labels on foils, etc.) • Fiber heads optimised for special tasks (wafer mapping, flat glass, etc.
E32 Special application Fiber sensor heads Specifications Item E32-D82F1 E32-L11FS E32-G14 Permissable bending radius R40 R25 Cut to length Yes No Ambient temperature –40°C to 70°C –40°C to 300°C Material Head PFA Fiber PMMA Sheath Polyethylene coating IEC 60529 IP67 Item E32-EL24-1 Permissable bending radius R10 Cut to length Yes Ambient temperature –40°C to 70°C Material Head Brass-nickel plated and aluminium Fiber PMMA Sheath ABS PVC E32-L66 E32-L64 Stainless steel
E39/E32 Fiber accessories Accessories Shape Type Comment Order code Focal lens – Extends sensing distance by more than 500% – For M4 Through beam fibers E32-TC200, E32-ET11R, E32-T11 (fits M2.6 thread) – 2 pcs per set E39-F1 Focal lens (side view) – For M4 through beam fibers E32-TC200, E32-ET11R, E32-T11, E32-T61-S, E32-T81R-S (fits M2.
E3X-HD Fiber amplifier Easy-teach digital fiber amplifier The E3X-HD with 1-button Smart tune set-up provides fast and simple teaching. Dual digital display and advanced features make the E3X-HD ideal even for demanding applications.
E3X-HD Fiber amplifier Item Specifications Type Standard models Model E3X-HD11 Connection method Pre-wired Control output NPN output For Communications Unit E3X-HD41 PNP output E3X-HD6 E3X-HD8 E3X-HD14 Wire-saving connector M8-4pin connector NPN output NPN output PNP output Red, 4-element LED (625 nm) Power supply voltage 12 to 24 VDC±10%, ripple (p-p) 10% max. Power consumption Normal Mode: 720 mW max. (Current consumption: 30 mA max. at 24 VDC, 60 mA max. at 12 VDC.
E3X-HD Fiber amplifier Easy One-Button-Teaching/Smart Tuning Setting of Smart Tuning Easy Solution Fewer Setting Steps E3X-HD Conventional Model 1 Step 1 Power adjustment Step Smart tuning With workpiece Without workpiece Power adjustment 2 Step Threshold setting Optimum settings Easy Solution Threshold setting Press only twice.
E3X-SD Fiber amplifier Single display digital fiber amplifier E3X-SD allows easy one button setting and provide the best value performance ratio for standard applications. • Auto-teaching during machine operation • 2-point teaching within a few seconds • Simple threshold adjustment with up/down keys Ordering information Item Order code NPN output PNP output Pre-wired E3X-SD21 2M E3X-SD51 2M Fiber amplifier connector*1 E3X-SD7 E3X-SD9 *1 Order connector separately.
E3X-NA Fiber amplifier Digital fiber amplifier with potentiometer adjustment The E3X-NA is the ideal amplifier for standard fiber applications providing quick & easy potentiometer adjustment and bargraph display.
E3NX-FA Fiber amplifier High-performance digital fiber amplifier The E3NX-FA amplifier is best choice for most challenging fiber applications in terms of long sensing distance, minute object detection or high speed processes.
E3NX-FA Fiber amplifier Inputs/ Item outputs Specifications Type Standard models Advanced models Model for sensor communications unit NPN output E3NX-FA11 E3NX-FA6 E3NX-FA21 E3NX-FA7 E3NX-FA7TW E3NX-FA24 – PNP output E3NX-FA41 E3NX-FA8 E3NX-FA51 E3NX-FA9 E3NX-FA9TW E3NX-FA54 E3NX-FA54TW Connection method Pre-wired Wire-saving connector Pre-wired Wire-saving connector M8 connector Outputs 1 output 2 outputs 1 output 2 outputs 1 output 2 outputs via com.
E3NX-FA Fiber amplifier Easy One-Button-Teaching/Smart Tuning Automatic setting of optimum values TUNE button Press the once with a workpiece and once without a workpiece Threshold + Incident level ST 5000 Set to the intermediate value between the incident levels with and without a workpiece. 9999 Incident level adjustment with and without a workpiece Dynamic range increased by a factor of 40,000 Easy setting of optimum power and threshold by pushing tune button twice.
E3X-MDA Fiber amplifier 2-in-1 Digital fiber amplifier E3X-MDA incorporates 2 digital fiber amplifiers in one slimline housing. For applications requiring the detection of two objects simultanously the E3X-MDA provides an easy to use operation saving space and set-up time. • Two digital amplifiers in one slimline housing • Twin output models – on/off or area (between two threshold values) • Signal comparison functions (AND, OR, etc.
E3X-NA_F Fiber amplifier Fast response digital amplifier with potentiometer The E3X-NA_F provides a very fast response time and is the ideal amplifier for high speed detection applications.
E3X-DAC-S Mark sensors E3X-DAC-S high functionality mark detection sensor The E3X-DAC-S provides reliable mark detection for standard as well as challenging applications. The separate sensing head setup allows the easy adaption to the mounting requirements even when space is crucial. The remote amplifier provides easy teaching for standard applications but also on demand full control over the detection performance for most challenging applications.
E3X-DAC-S Mark sensors Fiber amplifier connectors Shape Type Comment Order code Fiber amplifier connector 2 m PVC cable E3X-CN21 30 cm PVC cable with M12 plug connector (4 pin) E3X-CN21-M1J 0.3M 30 cm PVC cable with M8 plug connector (4 pin) E3X-CN21-M3J-2 0.3M 39,994 Easy to operate detection of challenging or colored registration marks. 38 Detection of challenging registration marks e.g. with texts or graphics.
E3X-DAH-S Fiber amplifier Digital fiber amplifier with infrared LED The digital fiber amplifiers with infrared LED are ideal for water detection applications or where visible light is not desired.
Fiber optics Technical information Fiber optics Item Principle of operation Fiber optic photoelectric sensors comprise two parts, the amplifier and the sensing head. The amplifier contains the emitter (the light source) and receiver (detector) along with their associated electronics. The fiber optic cable is the means used to transfer the light to the sensing head.
Fiber optics Technical information Item Using fiber optic sensors The main advantage of fiber optics is that they are small. This means that they can be mounted in places where other sensors couldn't fit. As the sensor heads are extremely compact, they are ideal for the stable detection of small objects. As a result of the less light that is emitted they generally do have smaller ranges than conventional photoelectric sensors.
Dimensions E32-A10 E32-A03 20.5 3.2 Stamp (1 mm dia.) 4 6 25 10 4 4.3 17.6 11 3 dia. Type indicated tube Ø3.3 (45) E39-L83 mounting bracket (SUS) 6 8 16.5 3.2 10 2R1.6 7 2 Fiber attachment (E39-F9) Sensing head *1 2-optical fiber Ø2.2 *Material: brass/nickel plating 2 dia. Detecting head (ABS) 3.5 3.4 2000 (Standard length) 21 2,000 1.8 8.4 Two, R1.6 0.4 Sensing surface Optical axis 2-Ø3.2 2-Ø6.2 Counter Sinking E32-A03-1 E32-C11N 24.5 18.
Dimensions E32-C42 E32-D14F White markings: emission side (heat-shrinkable tube) Brancher Two fiber attachments (ABS resin) Optical fiber: Irraxtube: 2.6 dia. two, 1.2 dia. 3 dia. 6 x 0.175 dia. (reception fibers) 15 15 2 (100) 22 100 2,000 Sensing head: 2 dia.* 1 x 0.175 dia. (emission fiber) (26) Fluororesin tube (protective cover) 4.5 (5) 10 25 1,000 *Material: stainless steel (SUS303) Optical fiber: 2.2 dia. Optical axis Sensing head: 7 dia. Optical-axis mark E32-CC200 Sixteen 0.25 dia.
Dimensions E32-D22B E32-D21 Two hexagonal nuts Two toothed washers Protective tube Sensing head: Four, 0.25 dia. M3 x 0.5* Two fiber attachments (E39-F9) 25 10 Optical fiber: two, 1 dia. 1.5 dia. 1.8 2.5 15 10 15 15 2,000 Attachment 100 *1. Material: stainless steel (SUS304) 11 5.5 25 Optical fiber: Brancher (ABS): 3 dia. 1 dia. Sensing head *1 Four, 0.25 dia. 2,000 *Material: brass/nickel plating E32-D24, E32-D24R E32-D21N 2,000 (8.
Dimensions E32-D36T E32-D81R-S, E32-D81R Using the E32-D81R-S 2,000 23.45 11.4 R10 Two hexagonal nuts (SUS) Two toothed washers (SUS) (100) Sensing head: Protective M6 x 0.75 *1 tube (grey) SUS flexible tube 5 dia. 2.2 dia. Sleeve (4.2 dia.) 15 M4 x 0.7 4 4.5 8.5 2 5 5 20.4 3 Optical fiber: two, 2.2 dia. Eight, R0.5 2 20 Fiber: 1.2 dia. Sensing head 13.25 Emission side: sixteen, 0.265 dia. 5 (70) 5 11.5 10 *2 15 B 2,000 A SUS303 5 dia. Using the E32-D81R 5 2.2 dia.
Dimensions E32-ET15YR-1 E32-DC200E Two, 0.5 dia. 13 Two fiber attachments (E39-F9) 25 10 3 Two hexagonal nuts Two toothed washers Sensing head: M3 x 0.5* Optical fiber: two, 1 dia. Ø1 2.5 1.7 1.8 2,000 11 R1. *Material: stainless steel (SUS304) 8 E32-DC200F, E32-DC200FR 35 2.7 5.5 2 2000 Stainless1.2 dia. steel tube max. (SUS304) Two, 0.5 dia. Two fiber attachments (E39-F9) Two hexagonal nuts 25 Two toothed washers 10 Sensing head: M3 x 0.5 *2 Optical fiber: two, 1 dia. 2.
Dimensions E32-L11FS E32-ET16WR-2 17.5 10 34 7 9 R15 Fluororesin (PFA) Mounting hole A Two, 4.2-dia. mounting holes 80 66 4.5 dia. Fluororesin (PFA) 4-dia. fluororesin tube (t=0.5)(PTFE) Standard length: 2 m 6 7.5 dia. cylinder countersinking SUS316L 12 28 50 sensing area (11) 4.5 dia. 8.6 dia. countersinking 98 Glass 38.5 35 optical axis 2,000 4.5 9.5 Optical fiber: 2.2 dia. E32-L15 28 R0 Ø1 11.6 Ø2,2 2000 ,2 11.
Dimensions E32-LR11NP E32-L25L Two, 3.2 dia. lenses 4 (11.5) Sensing distance Two fiber attachments (E39-F9) 4.8 25 6 16 2,000 (45) 18 Toothed washer (Nickel-plated iron) 10 Optical fiber: two, 1 dia. 6.5 15.8 11 Hexagonal nut Opposite side: 10, Thickness: 2.4 (Nickel-plated brass) M6×0.75 (Trivalent chrome-plated zinc alloy) Sensing head* 5 Two, 3.2 dia. mounting holes with 6 dia. countersinks on both sides 2.35 2,000 *Material: polycarbonate Sensing surface Two, 1.5 dia.
Dimensions E32-T12L E32-R21 Two fiber attachments Lens (PMMA) Two hexagonal nuts Two washers Silicon tube Sensing head* M6 x 0.75 Optical fiber: two, 1 dia. 2.4 dia. 1.4 dia. Sensing head: 3 dia.* Optical fiber: 2.2. dia. 25 10 3 11 (14) 5 dia. 2,000 *Material: brass/nickel plating 2.2 10 3 2.8 E32-T14 11 17.8 14 2,000 8.2 Lens (PMMA) 4.4 dia. 27.8 Heat-resistant ABS Nitrile rubber *Material: ABS 8 7.6 E32-T11, E32-T11U Optical axis R3.5 Sensing head: M4 x 0.
Dimensions E32-T16W, E32-T16WR E32-T15Z 69 Two, 2.2 dia. mounting holes with 4.4 dia. countersinks on both sides 3 2.5 2,000 15 7.5 5 65 45 12 Two, 3.2 dia. mounting holes with 6 dia. countersinks Optical fiber: 2.2. dia. 2,000 8 1.5 4 Sensing surface 23 18 Sensing head Material: aluminium Optical fiber: 2.2 dia. Sensing head material: ABS E32-T16 Sensing surface (3 x 30) 27 5 2,000 6 dia. 25 Optical axis 18.5 15.5 8.
Dimensions E32-T51V E32-T22L 0.9 dia. Sensing head: 2 dia.* Heat-shrinkable tube Optical fiber: 1 dia. 1.8 dia. M4 x 0.7 * Two nuts Two spring 1.15 dia. M2.6 x 0.45 washers 25 10 8 (2) 17 12 2.2 dia. Connected to flange (vacuum side) 26 3 20 Fiber attachment (E39-F9) 22 Optical fiber: 3 dia. 4 dia. 4 dia. (30) 1,000 2,000 *Material: stainless steel *Material: aluminium E32-T54 E32-T22S Sensing surface Sensing head* 1.7 dia. Optical fiber: 2.2 dia. 1 Sensing head: 3 dia.* 2.
Dimensions E32-TC200A E32-T84S-S B 25 A (14.2) R5 2,000 12 3 dia. 4 dia. Flexible tube: 2.9 dia. (stainless steel) 90 30 max. 6 5 4 dia. Optical fiber: 2.2 dia. 2.2 dia. Sleeve Antislip tread 1.8 5.5 3.5 dia. Sensing head Material: stainless steel (SUS303) 12 Two hexagonal nuts Two toothed washers Sensing head: M3 x 0.5* 1 dia. E32-T21R: 0.5 dia. 13 3 dia. 2,000 9.5 13.5 *Material: brass/nickel plating E32-TC200B, E32-TC200BR 3 dia. Lens (2 dia.
Dimensions E39-F1V E39-F11 0.5 dia. hole 42.5 10.8 8.9 10 R12.5 R7.5 10 R5 R10 4 dia. 6 M2.6 x 0.45 Effective depth: 3.8 Spot-facing depth: 0.9 27 E39-F2 E39-F13, E39-F14, E39-F15 M2.6 Effective depth: 3.2 2.8 dia. Spot-facing depth: 0.9 (48.6) 32.6 29.6 4 dia. 2 Material: aluminium for body and optical glass for lens 5.7 9.2 9.2 7.6 3.2 33.8 22.4 20.4 8 Four, 6 dia. E39-F3A 27.4 Four, R0.8 Four, A (See note.) M2 x 2 allen-head set screw (for securing the fiber) Four, 0.8 6 dia.
Dimensions E39-R3 E39-R1S 29 40.3 34 Two, 3.5 dia. 6 4.5 3.4 7.5 7 3.4 R20 14° 7 13.7 18.45 0.2 22.9 59.9 20 0.2 52 11 Adhesive tape side 22.5 8 16 19.3 Two, 3.2 dia. 2.7 1.6 41.8 2-M3 25.4 10.1 34.8 R25.4 38 34 3.4 1.2 2.6 1.2 10° Stainless steel (SUS304) E3X-CN21/E3X-CN11 (Master connector) +50 0 2,000 10 10.7 6.8 6 2.9 2.6 4 * 4 dia. 14.4 *1 6 8.4 0.8 E3X-CN11: vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.
Dimensions Amplifier E3NX-FA E3NX-FA21/FA51 E3NX-FA11/FA41 L/D indicator DPC indicator 21.7 *Cable Specifications OUT2 selection indicator ST indicator 21 27.1 L/D indicator Outer No. of diameter conductors Others Model DPC indicator 27.8 OUT2 indicator E3NX-FA11 ST indicator E3NX-FA41 OUT1 indicator OUT indicator Incident level (white, digital) Threshold level (green, digital) E3NX-FA51 5.1 104.8 (max. value with cover open) (37) 4.0 dia. 5 Conductor crosssection: 0.
Dimensions E3X-HD6/HD8/HD14/HD44 DPC indicator L/D indicator ST indicator 27.1 27.1 OUT indicator Incident level red digital display Threshold level green digital display 10 Vinyl-insulated round cable, 4 dia., 3 conductors (conductor cross-section: 0.2 mm², insulation diameter: 1.1 mm), standard cable length: 2 m Unbendable length at connection to the Amplifier Unit: 10 mm Minimum bending radius: 12 mm With Mounting Braket Attached DIN track mounting 5.1 Note: 146.9 170° (max.
Dimensions E3X-SD_ amplifiers - exemplary drawing for pre-wired version 15 10 Vinyl-insulated round cable 4 dia. cable / 3 conductors / Standard length: 2 m (Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm) Operation indicator 3 128.95 180° 93.75 Hole for optical communications 31.5 8 (9) 10.7 Two, 2.4 dia. 10.75 3.4 2.4 13 4 30.4 12.4 64.
Precautions Fiber Units Installation Tightening Force The tightening force applied to the Fiber Unit should be as follows: Screw-mounting model Cylindrical model Spring mounting clip Retaining screw (flat head or sunken head) Toothed washers Connection • Do not pull or press the fiber units. The fiber units withstand tensile or compression force of 9.8 N or 29.4 N maximum. • Do not bend the fiber unit beyond the permissable bending radius given under Ordering Information.
Precautions Heat-resistant fibers • The fiber connector E39-F10 cannot be used for extension. E32-T14/E32-G14 The presence of a reflective object at the front ends of the lenses may place the unit in an incident state. In this case, apply the supplied black stickers to the front ends of the lenses. Sticker Supplied slit for E32-T16 When using the supplied slit, peel off the back pa- Example per and apply it along the outline of the sensing E32-T16 sensing head surface.
Precautions Amplifier Unit Installation Mounting the End Plate (PFP-M) Operation after Turning Power ON An End Plate should be used if there is a possibility of the Amplifier Unit moving, e.g., due to vibration. If a Mobile Console is going to be mounted, connect the End Plate in the direction shown in the following diagram. The Amplifier Unit is ready to operate within 200 ms after the power supply is turned ON.
Precautions Fibers That Cannot Be Free-Cut (with Sleeves) 9 mm 13 mm 2. Disconnecting Fibers Remove the protective cover and raise the lock button to pull out the fibers. Protective cover Locked Unlocked Note: - To maintain the fiber properties, confirm that the lock is released before removing the fibers. - Be sure to lock or unlock the lock button within an ambient temperature range between 10C and 40C. Protective Cover Always keep the protective cover in place when using the Amplifier Unit.
Product list Order code Group Page Order code Group Page Order code Group E32-A03 2M Precision detection 21 E32-DC200F Miniature 12 E32-T22 2M Miniature Page 12 Special application 24 E32-DC200FR Miniature 12 E32-T221B Robot applications 20 E32-A03-1 2M Square shape 10 E32-E01 100M Accessories 26 E32-T222 2M Miniature 12 E32-A04 2M Miniature 12 E32-E01R 100M Accessories 26 E32-T222R 2M Miniature 12 Precision detection 21 E32-E02 100M Accessories 26 E32-T22B R
READ AND UNDERSTAND THIS DOCUMENT PERFORMANCE DATA Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments. Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements.
OMRON EUROPE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. Tel: +31 (0) 23 568 13 00 Fax: +31 (0) 23 568 13 88 www.industrial.omron.eu Austria Tel: +43 (0) 2236 377 800 www.industrial.omron.at France Tel: +33 (0) 1 56 63 70 00 www.industrial.omron.fr Norway Tel: +47 (0) 22 65 75 00 www.industrial.omron.no Spain Tel: +34 913 777 900 www.industrial.omron.es Belgium Tel: +32 (0) 2 466 24 80 www.industrial.omron.be Germany Tel: +49 (0) 2173 680 00 www.industrial.omron.
