Brochure

36
E3X-NA_F Fiber amplifier
Fast response digital amplifier with potentiometer
The E3X-NA_F provides a very fast response time and is the ideal amplifier for high
speed detection applications.
• Short turn on time of only 20 μs
• Easy adjustment with potentiometer
Ordering information
Specifications
Note: For teachable fast response fiber amplifiers with a digital display contact your OMRON representative.
Item Order code
NPN output PNP output
Pre-wired
E3X-NA11F E3X-NA41F
M8 connector (4 pin)
–
*1
*1
Contact your OMRON representative
E3X-NA44FV
Item NPN output E3X-NA11F -
PNP output E3X-NA41F E3X-NA44FV
Light source (wave length) Red LED (680 nm)
Power supply voltage 12 to 24 VDC±10%, ripple (p-p): 10% max.
Protective circuit Reverse polarity protection, output short-circuit protection, mutual interference prevention
Response time Operation: 20 µs max.
Reset: 30 µs max.
Sensitivity adjustment 8-turn endless adjuster (potentiometer)
Functions OFF-delay timer: 40 ms (fixed)
Degree of protection IEC 60529 IP50 (with protective cover attached) IEC 60529 IP66 (with protective cover attached)