Datasheet

ManualsBrandsOmron Industrial Automation ManualsInductive SensorsInductive Sensor 20mm NO/NC 200mA

D-1E2Q5

E2Q5

Long Distance Square Inductive Proximity Sensor

E2Q5

• M12 Plug-in connection

• Integrated short circuit and

reverse polarity protection

• Active face positioning:

Y-axis 15°, X-axis 90°

incremets

Square Proximity Sensor

Ordering Information

Sensing

distance

Connection

Active

face

Output

NO NO + NC

20 mm

shielded

Plug-in

connector

Changable

NPN

E2Q5-N20E1-M1 E2Q5-N20E3-M1

PNP

E2Q5-N20F1-M1 E2Q5-N20F3-M1

40 mm

non-shielded

NPN

E2Q5-N40ME1-M1 E2Q5-N40ME3-M1

PNP

E2Q5-N40MF1-M1 E2Q5-N40MF3-M1

Summary of content (6 pages)

PAGE 1
Long Distance Square Inductive Proximity Sensor E2Q5 Square Proximity Sensor • M12 Plug-in connection • Integrated short circuit and reverse polarity protection • Active face positioning: Y-axis 15°, X-axis 90° incremets Ordering Information Sensing distance 20 mm shielded Plug-in connector Output Active face Changable NPN PNP NPN PNP NO E2Q5-N20E1-M1 E2Q5-N20F1-M1 E2Q5-N40ME1-M1 E2Q5-N40MF1-M1 NO + NC E2Q5-N20E3- M1 E2Q5-N20F3- M1 E2Q5-N40ME3- M1 E2Q5-N40MF3- M1 E2Q5 40 mm non-shielded Connectio
PAGE 2
Rating/performance shielded non-shielded E2Q5-N20 ## -M1 E2Q5-N40M # 3- M1 20 mm ± 10% 40 mm ± 10% 60 x 60 x 1 mm 120 x 120 x 1 mm 0 to 16,2 mm 0 to 32,4 mm 150 Hz Ferrous metals 15% max. of sensing distance Sn 10 to 30 VDC 20 mA max. E2Q5-N # # #E1-## : NPN - NO E2Q5-N # # #E3-## : NPN - NO + NC E2Q5-N # # #F1-## : PNP - NO E2Q5-N # # #F3-## : PNP - NO + NC Load 200 mA max. On-stage voltage drop 3 VDC max.
PAGE 3
Output Circuit Diagramm NPN output Model Operation mode Timing chart Output circuit Brown Non-sensing zone Sensing zone Proximity Sensor Sensing object (%) Proximity Sensor main circuits 0 Rated sensing distance E2Q5-N20E1-M1 E2Q5-N40ME1-M1 100 NO 4.7kΩ +V Load Operation Indicator (yellow) Black Blue 0V ON OFF ON OFF Yellow indicator Connector Pin Arrangement Control output 1 2 4 3 Note: Terminal 2 is not used Brown Sensing zone Proximity Sensor 4.
PAGE 4
PNP output Operation mode Model Timing chart Output circuit Brown Non-sensing zone Sensing zone Proximity Sensor Sensing object 100 (%) Black Operation Indicator (yellow) Load 4.
PAGE 5
Precautions ! Caution Power supply Do not impose an exessive voltage on the E2Q2, otherwise it may explode or burn. Do not connect an AC power supply to any DC model. If AC power (100 VAC or more) is supplied to the sensor, it may ex- Mutual Interference If more than one Sensor is located in parallel, ensure to maintain enough space between adjacent Sensors to suppress mutual interference as provided in the following diagram. Side-by-side A plode or burn.
PAGE 6
Mounting Environment Mounting the Sensor The Proximity Sensor must be subjected to excessive shock with a hammer when it is installed, otherwise the Proximity Sensor may be damaged or lose its water-resistivity. Water Resistivity Do not use the Proximity Sensor underwater, outdoors or in the rain. Maintenance and Inspection Periodically perform the following checks to ensure stable operation of the Proximity Sensor over a long period of time.