Datasheet

ManualsBrandsOmron Industrial Automation ManualsCapacitive SensorsCapacitive Sensor NPN 10mm Break Contact (NC) 100mA

CSM_E2K-F_DS_E_5_5

Flat Proximity Sensor

E2K-F

Flat Capacitive Sensor with a

Thickness of Only 10 mm

• Flat Sensor with excellent space efficiency.

(Model with built-in Amplifier is only 10 mm thick.)

• Direct mounting onto a metallic surface is possible.

Ordering Information

Sensors [Refer to Dimensions on page 4.]

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Be sure to read Safety Precautions on

page 3.

Appearance

Sensing distance

(Adjustable range)

Output configuration

Model/Operation mode

NO NC

DC 3-wire

NPN

E2K-F10MC1 2M E2K-F10MC2 2M

E2K-F10MC1-A 2M E2K-F10MC2-A 2M

Flat

Unshielded

10 mm

(4 to 10 mm)

Summary of content (5 pages)

PAGE 1
Flat Proximity Sensor E2K-F CSM_E2K-F_DS_E_5_5 Flat Capacitive Sensor with a Thickness of Only 10 mm • Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only 10 mm thick.) • Direct mounting onto a metallic surface is possible. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 3. Ordering Information Sensors [Refer to Dimensions on page 4.
PAGE 2
E2K-F Ratings and Specifications Item Model E2K-F10MC@-A E2K-F10MC@ Sensing distance 10 mm (Sensing distance adjustable range: 4 to 10 mm) 10 mm ±10% Set distance 0 to 7.5 mm * Differential travel 15% max. of sensing distance Detectable object Conductors and dielectrics Standard sensing object Grounded metal plate: 50 × 50 × 1 mm Response frequency 100 Hz Power supply voltage (operating voltage range) 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. Current consumption 10 mA max.
PAGE 3
E2K-F I/O Circuit Diagrams NO Models Timing chart NC Models Present Sensing object Not present ON Output transistor (load) OFF Detection indicator (red) OFF ON Brown +V 100 Ω Load Proximity Sensor main circuit Output circuit Black * Output Blue 0V * Load current: 100 mA max. Safety Precautions Refer to Warranty and Limitations of Liability. WARNING Mutual Interference This product is not designed or rated for ensuring safety of persons either directly or indirectly.
PAGE 4
E2K-F (Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified. E2K-F Mounting Hole Dimensions Two, M3 or 3.5 dia. 50 42 34 42±0.2 Sensitivity adjuster *1 *2 Detection indicator (red) 5 5 Two, 3.5 dia. 20 5 10.1 *1. Only the E2K-F10MC@-A has a sensitivity adjuster. *2. 2.9-dia. vinyl-insulated round cable (Conductor cross section: 0.14 mm2, Insulator diameter: 0.9 mm), Standard length: 2 m.
PAGE 5
Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron).