N E W Proximity Sensors DC 3-Wire Models E2E NEXT Series 9 mm [Quadruple distance em model of M12 sized] Exceptional sensing range* Enables easier and standardized design * Based on December 2018 OMRON investigation.
Proximity Sensors E2E NEXT Series Enables easier and standardi previously not possible PREMIUM Model Easy design Standardized design Exceptional sensing range *1 9 [M12] mm *2 The PREMIUM Model, which has a longer detection range compared to Quadruple distance model previous models, allows for more spacious designs with less risk of 9 mm [M12] contact. It also enables you to standardize your designs by letting you adopt a single one-size model instead of multiple models of different sizes.
zed designs New standards for usability Early error detection 1 location, all new E2E Sensors can be monitored P.8 with IO-Link Quick recovery 10 360 second replaceable with e-jig (adaptor) degree view P.10 P.10 with high visibility LED indicator Less unexpected facility stoppages Strong resistance to cutting oil 2 -year oil resistance *3 *3. Pre-wired models and pre-wired connector models. P.
Proximity Sensors E2E NEXT Series PREMIUM Model Equipped with exceptional sensing range* Easy design to enable collision-free sensor installation Enables designs with more distance between the sensor and the sensing object, thereby reducing unexpected facility stoppages due to collision and false detection, which occurred with previous proximity sensors.
Allows for more spacious design with less risk of contact With previous models, to avoid false detections, you were forced to adopt sensor installation designs that risked contact. The E2E NEXT PREMIUM Proximity Sensor can detect accurately from a greater distance, which means you can adopt designs with more space and less risk of contact.
Proximity Sensors E2E NEXT Series PREMIUM Model Exceptional sensing range*1 Standardized design allows you to standardize your design with a single one-size model Ensures equivalent sensing distance while being one size smaller than previous models. Equipment and facilities formerly designed to use sensors of multiple sizes can now be designed to use sensors that are all the same size, allowing you to standardize your designs.
Easy to install, even where space is limited E2E NEXT PREMIUM Model Proximity Sensors ensure equivalent sensing distance while being one size smaller than previous models, allowing you to install them in spaces where conventional sensors were too big to fit. Proximity sensors could not be installed due to limited space. Previous models M18 E2E NEXT They can be installed due to limited space. One size smaller to allow you to install proximity sensors where space is limited.
Proximity Sensors E2E NEXT Series PREMIUM Model New standards for usability BASI BA SIC C Mo Mode dell Early error detection Enables facility designs that allow for early discovery of the site and substance of failure Less time required from failure to recovery (MTTR: Mean Time To Recovery). Excessive proximity Detects sensor failures through two output types, NO and NC Enables failure discovery by wiring two outputs, NO and NC.
Enables real-time identification of the site and substance of sensor failure from a single location * Screen is a conceptual illustration. Sensor No.12 is too close to the sensing object. By using the IO-Link Master to connect proximity sensors to your controller, you can use your monitor (HMI) for early discovery of the site and substance of proximity sensor failures.
Proximity Sensors E2E NEXT Series PREMIUM Model BASIC Model * Applies only to the description of the high-brightness LED indicator. New standards for usability Quick recovery Enables facility designs that allow for quick recovery in case of failure Less time required from failure to recovery (MTTR: Mean Time To Recovery). All around visible high-brightness LED indicator Adopts high-brightness LED that is more luminous and visible than those in previous models.
Replacements in as little as 10 seconds* using e-jig Using e-jig eliminates the need for adjustment so that anyone can install in the same position. Previous models A lot of time required to adjust to the optimum distance. Adjustment position varies depending on the worker’s skill and makes detection unstable. 2. Check the detection status with the workpiece. Repeat steps 1 to 3 until detection is stabilized. 1. Fasten the sensor temporarily. 4. Finish by fixing the nut. 3.
Proximity Sensors E2E NEXT Series PREMIUM Model New standards for usability BASIC Model Less unexpected facility stoppages Excellent environmental resistance enables robust facility design Reduces sudden facility stoppages by reducing the number of failures, even in severe environments. Unexpected component failures: Approx. 30 % are caused by cutting oil.
Cables with enhanced oil resistance shut out cutting oil for 2 years* Our new PVC compound protects against damage caused by swelling, deterioration or cracking, preventing oil from seeping into and destroying internal circuits. Designed to resist oil ingress for up to two years.
E2E/E2EQ NEXT Series Selection Guide E2E/E2EQ NEXT Series Proximity Sensor 3-wire Models Premium model capable of long-sensing distance with enhanced user-friendliness DC 3-wire (PREMIUM Model) P15 E2E/E2EQ NEXT Series Basic model with the same sensing distance as the previous model, but with enhanced user-friendliness DC 3-wire (BASIC Model) P15 E2E/E2EQ NEXT Series DC 2-wire P67 2-wire Models Connector Cable M12 Oil-resistant model that minimizes failures caused by cutting oils (oil- and bendi
Proximity Sensor E2E/E2EQ NEXT Series E2E/E2EQ NEXT Series DC 3-wire DC 3-Wire Enables easier and standardized designs previously not possible *1. *2. *3. *4. *5. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Based on December 2018 OMRON investigation. Time required to adjust the distance when installing a Sensor. Based on OMRON investigation. Refer to Ratings and Specifications for details.
E2E/E2EQ NEXT Series PREMIUM Model E2E NEXT Series (Triple distance model) DC 3-wire [Refer to Dimensions on page 64.] Shielded *1 Size (Sensing distance) Connection method Pre-wired (2 m) *2 Operation mode 38 mm *3 NO E2E-X3B1T8 2M E2E-X3B1D8 2M E2E-X3C18 2M NC - E2E-X3B28 2M E2E-X3C28 2M NO E2E-X3B1TL8 2M E2E-X3B1DL8 2M E2E-X3C1L8 2M NC - E2E-X3B2L8 2M E2E-X3C2L8 2M NO E2E-X3B1T8-M1TJ 0.3M E2E-X3B1D8-M1TJ 0.3M E2E-X3C18-M1TJ 0.3M NC - E2E-X3B28-M1TJ 0.3M E2E-X3C28-M1TJ 0.
E2E/E2EQ NEXT Series Size (Sensing distance) M30 (40 mm) Connection method Body size Pre-wired (2 m) *1 82 mm *2 M12 Pre-wired Smartclick Connector (0.3 m) M12 Connector 82 mm *3 80 mm Model Operation mode PNP IO-Link (COM3) NPN IO-Link (COM2) *4 --- *4 NO E2E-X40MB1TL30 2M E2E-X40MB1DL30 2M E2E-X40MC1L30 2M NC - E2E-X40MB2L30 2M E2E-X40MC2L30 2M NO+NC - E2E-X40MB3DL30 2M E2E-X40MC3L30 2M NO E2E-X40MB1TL30-M1TJ 0.3M E2E-X40MB1DL30-M1TJ 0.3M E2E-X40MC1L30-M1TJ 0.
E2E/E2EQ NEXT Series Ratings and Specifications E2E NEXT Series (Quadruple/Triple distance model) DC 3-wire Shielded Types Size Item Model Quadruple distance model Triple distance model M8 M12 M18 M30 M8 M12 M18 M30 E2E-X4@8 E2E-X9@12 E2E-X14@18 E2E-X23@30 E2E-X3@8 E2E-X6@12 E2E-X12@18 E2E-X22@30 4 mm±10% 9 mm±10% 14 mm±10% 23 mm±10% 3 mm±10% 6 mm±10% 12 mm±10% 22 mm±10% Setting distance 0 to 3 mm 0 to 6.8 mm 0 to 10.6 mm 0 to 17.6 mm 0 to 2.4 mm 0 to 4.8 mm 0 to 9.
E2E/E2EQ NEXT Series Types Size Item Materials Model Triple distance model M12 M18 M30 M8 M12 M18 M30 E2E-X4@8 E2E-X9@12 E2E-X14@18 E2E-X23@30 E2E-X3@8 E2E-X6@12 E2E-X12@18 E2E-X22@30 Case Nickel-plated brass Sensing surface Polybutylene terephthalat (PBT) Clamping nuts Nickel-plated brass Toothed washers Zinc-plated iron Cable Vinyl chloride (PVC) Main IO-Link functions*2 IO-Link Commun ication specifica tions *2 Quadruple distance model M8 Operation mode switching between N
