Datasheet

E2EQ
6
Pre-wired Connector Model Connections
Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Do not use this product under ambient conditions that exceed the
ratings.
● Design
Influence of Surrounding Metal
When mounting the Sensor within a metal panel, ensure that the
clearances given in the following table are maintained. Failure to
maintain these distances may cause deterioration in the performance
of the Sensor.
Influence of Surrounding Metal (Unit: mm)
Mutual Interference
When installing two or more Sensors face-to-face or side-by-side,
ensure that the minimum distances given in the following table are
maintained.
Mutual Interference (Unit: mm)
● Mounting
Do not tighten the nut with excessive force. A washer must be used
with the nut.
Note: 1. The allowable tightening strength depends on the distance from the
edge of the head, as shown in the following table. (A is the distance
from the edge of the head. B includes the nut on the head side. If the
edge of the nut is in part A, the tightening torque for part A applies
instead.)
2. The following torque assume washers are being used.
Model E2EQ-X@X1-M1(T)J E2EQ-X@D1-M1(T)GJ
Connections
4
3
2
1
4
3
2
1
Main
circuit
Brown
(not used)
Black (+)
Blue (−)
Pre-wired Connector
Model
E2EQ-X@X1-M1J
Sensor I/O Connector
XS2F-D42@-@C0-A
4
3
2
1
4
3
2
1
Brown (+)
Blue (−)
Pre-wired Connector
Model
E2EQ-X@D1-M1GJ
Sensor I/O Connector
XS2F-D42@-@A0-A
Main
circuit
4
3
2
1
4
3
2
1
Main
circuit
Brown (not used)
White (not used)
Black (+)
Blue (−)
Pre-wired Connector
Model
E2EQ-X@X1-M1TJ
Sensor I/O Connector
XS5F-D421-@80-A
4
3
2
1
4
3
2
1
Brown (+)
White (not used)
Blue (not used)
Black (−)
Pre-wired Connector
Model
E2EQ-X@D1-M1TGJ
Sensor I/O Connector
XS5F-D421-@80-A
Main
circuit
WARNING
Precautions for Correct Use
Model Item l d D m n
E2EQ-X4X1(-M1(T)J) 2.4 18 2.4 12 18
E2EQ-X8X1(-M1(T)J) 3.6 27 3.6 24 27
E2EQ-X15X1(-M1(T)J) 64564545
E2EQ-X3D1(-M1(T)GJ)
0
12
0
818
E2EQ-X7D1(-M1(T)GJ) 18 20 27
E2EQ-X10D1(-M1(T)GJ) 30 40 45
l
m
n
m
D
d dia.
l
Model Item A B
E2EQ-X4X1(-M1(T)J) 30 20
E2EQ-X8X1(-M1(T)J) 60 35
E2EQ-X15X1(-M1(T)J) 110 90
E2EQ-X3D1(-M1(T)GJ) 30 20
E2EQ-X7D1(-M1(T)GJ) 50 35
E2EQ-X10D1(-M1(T)GJ) 100 70
Torque Part A Part B
Model
Dimension
(mm)
Torque Torque
E2EQ-X4X1(-M1(T)J)
---
30 N·m
E2EQ-X8X1(-M1(T)J) 70 N·m
E2EQ-X15X1(-M1(T)J) 180 N·m
E2EQ-X3D1(-M1(T)GJ) 24
15 N·m ---
E2EQ-X7D1(-M1(T)GJ) 29
E2EQ-X10D1(-M1(T)GJ) 26 39 N·m 78 N·m
A
B
Part B Part A
Shielded Model