Datasheet

E2EQ
2
Pre-wired Connector Models (M12)
Long Sensing-distance Models
Standard Models
Accessories (Order Separately)
Sensor I/O Connectors (M12)
(Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.) [Refer to XS2, XS5.]
Note: Refer to Introduction to Sensor I/O Connectors for details.
Ratings and Specifications
Long Sensing-distance Models
*1. Use the Sensor within the range in which the green indicator is ON.
*2. The response frequency is an average value.
*3. The residual voltage is 5 V. Make sure that the device connected to the Sensor can withstand the residual voltage.
Appearance Sensing distance Output configuration Operation mode Model
M12
DC 2-wire
(3)-(4)
pin arrangement
NO
E2EQ-X4X1-M1J 0.3M
M18 E2EQ-X8X1-M1J 0.3M
M30 E2EQ-X15X1-M1J 0.3M
Standard Models Sensing distance Output configuration Operation mode Model
M12
DC 2-wire
(1)-(4)
pin arrangement
NO
E2EQ-X3D1-M1GJ 0.3M
M18 E2EQ-X7D1-M1GJ 0.3M
M30 E2EQ-X10D1-M1GJ 0.3M
Appearance Cable length Sensor I/O Connector model number Applicable Proximity Sensor model number
2 m XS2F-D421-DC0-A
E2EQ-X@X1-M1J
5 m XS2F-D421-GC0-A
2 m XS2F-D422-DC0-A
5 m XS2F-D422-GC0-A
2 m XS2F-D421-DA0-A
E2EQ-X@D1-M1GJ
5 m XS2F-D421-GA0-A
2 m XS2F-D422-DA0-A
5 m XS2F-D422-GA0-A
2 m XS5F-D421-D80-A
E2EQ-X@X1-M1TJ
E2EQ-X@D1-M1TGJ
5 m XS5F-D421-G80-A
Model
E2EQ-X4X1
E2EQ-X4X1-M1(T)J
E2EQ-X8X1
E2EQ-X8X1-M1(T)J
E2EQ-X15X1
E2EQ-X15X1-M1(T)J
Item
Sensing distance 4 mm ±10% 8 mm ±10% 15 mm ±10%
Set distance *1 0 to 3.2 mm 0 to 6.4 mm 0 to 12 mm
Differential travel 15% max. of sensing distance
Standard sensing object Iron, 12 × 12 × 1 mm Iron, 18 × 18 × 1 mm Iron, 30 × 30 × 1 mm
Response frequency *2 1 kHz 0.5 kHz 0.25 kHz
Control
output
Load current 3 to 100 mA
Residual voltage *3 5 V max. (Load current: 100 mA, Cable length: 2 m)
Operation mode (with sensing
object approaching)
Load ON: NO; For details, refer to the timing charts on page 5.
Protection circuits Load short-circuit protection, Surge suppressor
Ambient temperature range Operating: −25 to 70°C, Storage: −40 to 85°C, (with no icing or condensation)
Temperature influence
±15% max. of sensing distance at 23°C in the temperature range of −40 to 85°C
±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C
±15% max. of sensing distance at 23°C in
the temperature range of −25 to 70°C
Voltage influence ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Shock resistance Destruction: 1,000m/s
2
10 times each in X, Y, and Z directions
Connection method Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
Weight
(packed
state)
Pre-wired Models Approx. 65 g Approx. 140 g Approx. 190 g
Pre-wired
Connector Models
Approx. 20 g Approx. 40 g Approx. 90 g
Shielded
4 mm
8 mm
15 mm
Shielded
3 mm
7 mm
10 mm
Straight
L-shape
Straight
L-shape
Smartclick
Connector
Straight