Datasheet

7
E2EM
● Mounting
Tightening Force
Do not tighten the nut with excessive force.
A washer must be used with the nut.
Note: 1. The allowable tightening strength depends on the distance from the
edge of the head, as shown in the following table. (A is the distance
from the edge of the head. B includes the nut on the head side. If the
edge of the nut is in part A, the tightening torque for part A applies
instead.)
2. The following strengths assume washers are being used.
Dimensions
Part B Part A Part B Part A
Shielded Models Unshielded Models
Torque Part A Part B
Model
Dimension
(mm)
Torque Torque
M8 Shielded 99 N·m12 N·m
M12 30 N·m
M18 70 N·m
M30 180 N·m
(Unit: mm)
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Pre-wired Models (Shielded)
F
Mounting Hole
Dimensions
Dimensions M8 M12 M18 M30
F (mm) 8.5 dia. 12.5 dia. 18.5 dia. 30.5 dia.
+0.5
0
+0.5
0
+0.5
0
+0.5
0
E2EM-X2C@
30
7
8
26
13
3
15 dia.
*1
M8 × 1
Indicator *2
Two clamping nuts
Toothed washer
1. 4-dia. vinyl-insulated round cable with 2/3 conductors
(Conductor cross section: 0.3 mm
2
,
Insulator diameter: 1.3 mm), Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
2. Operation indicator (yellow)
E2EM-X4@@
38 9
2
10
33
17
4
21 dia.
*1
M12 × 1
Indicator *2
Two clamping nuts
Toothed washer
1. 4-dia. vinyl-insulated round cable with 2/3 conductors
(Conductor cross section: 0.3 mm
2
,
Insulator diameter: 1.3 mm), Standard length: 2 m
2. X1 Models: Operation indicator (red)
Setting indicator (green)
X2 Models: Operation indicator (red)
C Models: Operation indicator (yellow)
E2EM-X8@@
43
12
2
10
38
24
4
29 dia.
*1
M18
× 1
Indicator *2
Two clamping nuts
Toothed washer
1. 6-dia. vinyl-insulated round cable with
2/3 conductors (Conductor cross section: 0.5 mm
2
,
Insulator diameter: 1.9 mm), Standard length: 2 m
2. X1 Models: Operation indicator (red) Setting
indicator (green)
X2 Models: Operation indicator (red)
C Models: Operation indicator (yellow)
48
12
3
10
43
36
5
42 dia.
*1
M30 × 1.5
Indicator *2
Two clamping nuts
Toothed washer
1. 6-dia. vinyl-insulated round cable with 2/3
conductors (Conductor cross section: 0.5 mm
2
,
Insulator diameter: 1.9 mm), Standard length: 2 m
2. X1 Models: Operation indicator (red) Setting
indicator (green)
X2 Models: Operation indicator (red)
C Models: Operation indicator (yellow)
E2EM-X15@@