Datasheet

5
E2EH
Resistance to Detergents, Disinfectants, and Chemicals
• Performance is assured for typical detergents and disinfectants, but performance may not be maintained for some detergents
and disinfectants. Refer to the following table when using these agents.
• The E2EH passed testing for resistance to detergents and disinfectants performed using the items in the following table. Refer
to this table when considering use of detergents and disinfectants.
Test Conditions
After the test is completed, check that no problems exist with the following product
characteristics.
(1) Appearance (no damage that will affect the product characteristics)
(2) Operation Check (ON/OFF)
(3) Insulation resistance: 50 MΩ min. (at 500 VDC)
(4) Dielectric strength (1,000 VAC for 1 minute)
(5) Water resistance (IP67)
Category Product name Concentration Temperature Time
Chemical
Sodium hydroxide (NaOH) 1.5% 70°C 240h
Potassium hydroxide (KOH) 1.5% 70°C 240h
Phosphoric acid (H
3PO4)2.5%70°C 240h
Sodium hypochlorite (NaClO) 0.3% 25°C 240h
Hydrogen peroxide (H
2O2)6.5%25°C 240h
Alkaline foam
detergent
P3-topax-66s (Manufactured by Ecolab) 3.0% 70°C 240h
Acidic foam detergent P3-topax-56 (Manufactured by Ecolab) 5.0% 70°C 240h
Disinfectant P3-oxonia active 90 (Manufactured by Ecolab) 1.0% 25°C 240h
Te s t l i quid
Depth: 10 cm
Sensor