Datasheet
E2E/E2EQ NEXT Series
24
● Design
Influence of Surrounding Metal
When mounting the Proximity Sensor using a nut, only use the
provided nut. And ensure that the minimum distances given in the
following table are maintained.
(Unit: mm)
Note: Nuts that are supplied along with each Sensor (
*1, *2) are
different. Refer to
Dimensions for details on shapes.
When the Proximity Sensor is mounted in metal, ensure that the
minimum distances given in the following table are maintained.
(Unit: mm)
● Mutual Interference
When the Proximity Sensor is embedded in metal, ensure that the
minimum distances given in the following table are maintained.
(Unit: mm)
● Mounting
Tightening Force
Do not tighten the nut with excessive force.
A washer must be used with the nut.
Note: 1.
The allowable tightening strength depends on the distance
from the edge of the head, as shown in the following table. (A
is the distance from the edge of the head. B includes the nut on
the head side. If the edge of the nut is in part A, the tightening
torque for part A applies instead.)
2. The following strengths assume washers are being used.
Long-distance type
Spatter-resistant Long-distance type
Standard-distance type
Type Item M8 M12 M18 M30
Long-distance type
E2E-X@
D@(-T)
Spatter-resistant Long-
distance type
E2EQ-X@
D@(-T)
*1
Shielded
L 0 0 0 0
d 20 20 50 70
D 2 4 4 8
m 9 18 33 60
n 18 20 54 90
Long-distance type
E2E-X@
MD@(-T)
*2
Unshielded
L 10 16 31 50
d 30 50 80 130
D 13 20 35 55
m 18 30 60 120
n 30 50 80 130
Standard-distance type
E2E-X@
R5D@(-T)
E2E-X5D@
(-T)
*2
Shielded
L 0 0 0
---
d 8 12 18
D 0 0 0
m 4.5 8 20
n 12 18 27
Type Item M8 M12 M18 M30
Long-distance type
E2E-X@
D@(-T)
Spatter-resistant Long-
distance type
E2EQ-X@
D@(-T)
Shielded
I 2 4 4 8
d 20 20 50 70
D 2 4 4 8
m 9 18 33 60
n 18 20 54 90
Long-distance type
E2E-X@
MD@(-T)
Unshielded
I 13 20 35 55
d 30 50 80 130
D 13 20 35 55
m 18 30 60 120
n 30 50 80 130
Standard-distance type
E2E-X@
R5D@(-T)
E2E-X5D@
(-T)
Shielded
I 0 0 0
---
d 8 12 18
D 0 0 0
m 4.5 8 20
n 12 18 27
m
n
m
D
d dia.
L
L
I
m
n
m
D
d dia.
I
Type Item M8 M12 M18 M30
Long-distance type
E2E-X@
D@(-T)
Spatter-resistant Long-
distance type
E2EQ-X@
D@(-T)
Shielded
A 25 40 70 140
B 20 30 45 70
Long-distance type
E2E-X@
MD@(-T)
Unshielded
A 80 120 200 380
B 60 100 120 280
Standard-distance type
E2E-X@
R5D@(-T)
E2E-X5D@
(-T)
Shielded
A 20 30 50
---
B 15 20 35
Model
Part A Part B
Dimension (mm)
Torque Torque
M8
Shielded 9
4 N·m 10 N·m
Unshielded 3
M12
Shielded 16
6 N·m 15 N·m
Unshielded 9
M18
Shielded 16
15 N·m 60 N·m
Unshielded 3
M30
Shielded 23
40 N·m 80 N·m
Unshielded 8
Model
Part A Part B
Dimension (mm)
Torque Torque
M8 9 4 N·m 10 N·m
M12 16 6 N·m 15 N·m
M18 16 15 N·m 30 N·m
M30 23 40 N·m 80 N·m
Model
Part A Part B
Dimension (mm)
Torque Torque
M8 9 9 N·m 12 N·m
M12
---
30 N·m
M18 70 N·m
A
B
A
Part B Part A Part B Part A
Shielded Models Unshielded Models