Datasheet

27
E2E
Dimensions
Main Units
Model Number-Dimensions Drawing Number Lookup Table
Note 1. Two clamping nuts and one toothed washer are provided with M8 to M30 Models.
2. The model numbers of M8 to M30 Pre-wired Models are laser-marked on the milled section and cable section. This does not apply, however, to models that
end in -U.
Model DC 2-Wire Models DC 3-Wire Models AC 2-Wire Models AC/DC 2-Wire Models
Model Shielded Model No. Model No. Model No. Model No.
Pre-wired Models
Shielded
M8 E2E-X2D@(-US) 1 E2E-X1R5E@/F@ 1 E2E-X1R5Y@ 3 ---
M12 E2E-X3D@(-US) 5 E2E-X2E@/F@ 5E2E-X2Y@ 7 E2E-X3T1 9
M18 E2E-X7D@(-US) 10 E2E-X5E@/F@ 10 E2E-X5Y@ 10 E2E-X7T1 10
M30 E2E-X10D@(-US) 12 E2E-X10E@/F@ 12 E2E-X10Y@ 12 E2E-X10T1 12
Unshielded
M8 E2E-X4MD@(-US) 2 E2E-X2ME@/F@ 2E2E-X2MY@ 4
---
M12 E2E-X8MD@(-US) 6 E2E-X5ME@/F@ 6E2E-X5MY@ 8
M18 E2E-X14MD@(-US) 11 E2E-X10ME@/F@ 11 E2E-X10MY@ 11
M30 E2E-X20MD@(-US) 13 E2E-X18ME@/F@ 13 E2E-X18MY@ 13
Connector
Models
(M12)
Shielded
M8 E2E-X2D@-M1(G) 14 E2E-X1R5E/F@-M1 14 ---
---
M12 E2E-X3D@-M1(G) 16 E2E-X2E/F@-M1 16 E2E-X2Y@-M1 18
M18 E2E-X7D@-M1(G) 20 E2E-X5E/F@-M1 20 E2E-X5Y@-M1 20
M30 E2E-X10D@-M1(G) 22 E2E-X10E/F@-M1 22 E2E-X10Y@-M1 22
Unshielded
M8 E2E-X4MD@-M1(G) 15 E2E-X2ME/F@-M1 15 ---
---
M12 E2E-X8MD@-M1(G) 17 E2E-X5ME/F@-M1 17 E2E-X5MY@-M1 19
M18 E2E-X14MD@-M1(G) 21 E2E-X10ME/F@-M1 21 E2E-X10MY@-M1 21
M30 E2E-X20MD@-M1(G) 23 E2E-X18ME/F@-M1 23 E2E-X18MY@-M1 23
Connector
Models
(M8)
Shielded
M8
E2E-X2D@-M3G 24 E2E-X1R5E/F@-M3 24
--- ---
Unshielded E2E-X4MD@-M3G 25 E2E-X2ME/F@-M3 25
Pre-wired
Connector
Models
Shielded
M8
E2E-X2D@-M1(T)GJ(-U)
26
--- --- ---
E2E-X2D@-M1TGJ-US
M12
E2E-X3D@-M1(T)GJ(-U)
27
E2E-X3D@-M1TGJ-US
M18
E2E-X7D@-M1(T)GJ(-U)
28
E2E-X7D@-M1TGJ-US
M30
E2E-X10D@-M1(T)GJ(-U)
29
E2E-X10D@-M1TGJ-US
Unshielded
M8 E2E-X4MD@-M1TGJ-US 30
--- --- ---
M12
E2E-X8MD1-M1(T)GJ
31
E2E-X8MD@-M1TGJ-US
M18
E2E-X14MD1-M1(T)GJ
32
E2E-X14MD@-M1TGJ-US
M30
E2E-X20MD1-M1(T)GJ
33
E2E-X20MD@-M1TGJ-US
Pre-wired
Connector
Models
(no polarity)
Shielded
M12 E2E-X3D1-M1J-T 27
--- --- ---
M18 E2E-X7D@-M1J-T 28
M30 E2E-X10D@-M1J-T 29
(Unit: mm)
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.