Datasheet
13E2E
Output Circuits and Timing Charts
Output Circuits
E2E
E2E-X@D@ DC 2-wire Models
DC 3-wire Models
E2E-X@D1
Without Diagnostic Output
E2E-X@D1-M1J-T
No Polarity
E2E-X@D1S
With Diagnostic Output
Load
Brown
4
Blue 0 V
1
(0 V)
0 V
4
3
Load
Brown
Blue 3
0 V
4
Load
Load
2
Orange (diagnostic
output)
E2E-X@D2
Without Diagnostic Output
Brown
2
Blue 0 V
1
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Note: 1. The load can be connected to
either the +V or 0 V side.
2. The pin numbers in the above diagram
are for the -M@G(J). For the -M1, pin 4
is +V and pin 3 is 0 V.
Note: 1. The load can be connected to
either the +V or 0 V side.
2. The E2E-X@D1-M1J-T has no
polarity. Therefore, terminals 3
and 4 have no polarity.
Note: 1. The load can be connected to
either the +V or 0 V side.
2. The pin numbers in the above
diagram are for the -M@G.
For -M1 models, pin 2 is +V
and
p
in 3 is 0 V.
Note: Connect both the loads to the +V
side of the control output and
diagnostic output.
Load
Brown 1
Blue 3
Load
Black 4
(or 2)**
100 Ω
Constant
current*
E2E-X@E@
NPN Output
E2E-C/X@C@
NPN Open-collector Output
E2E-C/X@B@
PNP Open-collector Output
E2E-X@F@
PNP Output
Blue 3
Load
Black 4
(or 2)***
Brown 1
0 V
100 Ω
*
**
Blue 3
Load
Black 4
Brown 1
0 V
100 Ω
Blue 3
Load
Black 4
Brown 1
0 V
Output
100 Ω
* Constant current output is 1.5 to 3 mA.
** When connecting to a Tr circuit.
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
*** Pin 4 is an NO contact, and pin 2 is an NC contact.
* Constant current output is 1.5 to 3 mA.
** Pin 4 is an NO contact, and pin 2 is an NC contact.
0 V