Datasheet

XS5 NEXT Series
92
Safety Precautions
Meaning of Display
Degree of Protection
Do not use the product if its protective capabilities have been
compromised, such as through swelling or cracks to housing or seal
materials.
If products in this state continue to be used, then cutting oil or other
contaminants may enter the product, leading to breakages or damage
from fire.
Connector Connection and Disconnection
• When connecting or disconnecting Connectors, be sure to hold the
Connectors by hand.
• Do not hold the cable when disconnecting Connectors.
Check the alignment using the slot in the polarity key.
• Do not wiring the Connector when your hands are wet. Malfunctions
or device damage may occur when power is supplied to a device.
• When mating Connectors, be sure to insert the plug all the way to the
back of the socket before attempting to lock the Connectors.
After you lock a Connector, always confirm that it is mated properly.
• Do not use tools of any sort to mate the Connectors. Always use
your hands. Pliers or other tools may damage the Connectors.
• When you replace a Connector, make sure that there is no liquid,
cutting oil, or other foreign matter on the mating surfaces before
you mate the Connector.
Disposal
Dispose of this product as industrial waste.
• Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.
• Always turn OFF the power supply before wiring. Failure to turn OFF
the power supply may lead to electric shock or damage to devices.
• As usage in environments in which cutting oil is used may impact service
life and performance, ensure the following requirements are met.
• Usage with cutting oil requirements as defined in specifications.
• Usage at a dilution ratio as recommended by cutting oil manufacturers.
• Usage immersed in oil or water is prohibited.
The cutting oil used may have a different impact on product service
life. Ensure that the product is used only after confirming with the
customer that there has been no deformation or deterioration of
seal material from the cutting oil.
• The mating coupler will impact the oil-resistance performance
values (years). Confirm mating of the couplers before use.
Mating Combinations
* Oil-resistant (polyurethane) cable products (XS5F-P, XS5H-P,
XS5W-P) as well as oil-resistant (polyurethane) robot cables
(XS5F-PR, XS5W-PR) are excluded. Please consult with OMRON
for details of these products.
• Environments with corrosive gases and high temperature and
humidity can cause bad connections and damage through
corrosion, leading to degraded performance, therefore do not use
these products in such environments.
• Do not pull on the Connectors or cables with excessive force.
• Do not step on or place any objects on the Connectors. Doing so
may damage the Connectors.
• Lay the cable where it will not be stepped on to prevent the wires
in the cable from being disconnected and to protect the Connectors
from being damaged. If the cable must be placed where it will be
stepped on, install a protective cover.
• At installation, if not installing sensors or switches, and not mating
plug connectors, then use water-resistant covers (XS5Z-11, XS2Z-
11) or dust-resistant covers (XS2Z-13/14/15) in order to ensure
correct connector mating.
Wiring
• Do not wire cables in environments in which the cable terminal
sections will be subject to fluids such as water or cutting oil.
• When wiring cables, ensure this is carried out in accordance with
the wiring diagram.
• Lay the cables so that external force is not applied to the
Connectors. Otherwise, the degree of protection (IP67G) may not
be achieved.
Degree of Protection (IP67)
• The degree of protection of Connectors (IP67) is not for a fully
watertight structure. Do not use the Connectors underwater.
• Do not step on or place any objects on the Connectors. Doing so
may damage the Connectors.
Precautions for
Safe Use
Supplementarycommentsonwhattodo
oravoiddoing,tousetheproductsafely.
Precautions for
Correct Use
Supplementarycommentsonwhattodo
oravoiddoing,topreventfailureto
operate,malfunction,orundesirable
effectsonproductperformance.
Precautions for Safe Use
Precautions for Correct Use
XS5@R XS5@-X/XR
Other XS5/
XS2 Series
XS5@R
Oil-resistance
performance
values
4 years
Oil-resistance
performance
values
2 years
Water-resistance
XS5@-X/XR
Oil-resistance
performance
values
2 years
Oil-resistance
performance
values
2 years
Water-resistance
Other
XS5/XS2
Series
*
Water-
resistance
Water-
resistance
Water-resistance