Datasheet

E2E/E2EQ NEXT Series
83
XS5 NEXT Series XS5 XS3E2E/E2EQ NEXT Series DC 2-wire E2E/E2EQ NEXT Series DC 3-wire
Mutual Interference
When installing two or more Proximity Sensors face-to-face or side-
by-side, ensure that the minimum distances given in the following
table are maintained.
(Unit: mm)
Shielded
Unshielded
Mounting
Tightening Force
Do not tighten the nut with excessive force.
A washer must be used with the nut.
Note: 1. The allowable tightening strength depends on the distance
from the edge of the head, as shown in the following table.
(A is the distance from the edge of the head. B includes the
nut on the head side. If the edge of the nut is in part A, the
tightening torque for part A applies instead.)
2. The following strengths assume washers are being used.
Quadruple distance model, Triple distance model,
Spatter-resistant Triple distance model
* If using the E2EQ (M18), refer to this torque value.
Double distance model, Single distance model,
Spatter-resistant Triple distance model,
Spatter-resistant Single distance model
* If using the E2EQ (M30), refer to this torque value.
Mounting
In the IO-Link mode, the cord between the IO-Link master and sensor
must have a length of 20 m or less.
Models Model
Item
A B
Quadruple
distance model
E2E-X4@8 40 20
E2E-X9@12 60 35
E2E-X14@18 90 50
E2E-X23@30 150 90
Triple distance
model/
Spatter-resistant
Triple distance
model
E2E(Q)-X3@8 25 20
E2E(Q)-X6@12 40 30
E2E(Q)-X12@18 70 45
E2E(Q)-X22@30 150 90
Double distance
model/
Spatter-resistant
Double distance
model
E2E(Q)-X2@8 20 15
E2E(Q)-X4@12 30 20
E2E(Q)-X8@18 60 35
E2E(Q)-X15@30 110 90
Single distance
model/
Spatter-resistant
Single distance
model
E2E(Q)-X1R5@8 20 15
E2E(Q)-X2@12 30 20
E2E(Q)-X5@18 50 35
E2E(Q)-X10@30 100 70
Models Model
Item
A B
Quadruple
distance model
E2E-X8M@8 80 60
E2E-X16M@12 160 120
E2E-X30M@18 360 300
E2E-X50M@30 700 480
Triple distance
model
E2E-X6M@8 80 60
E2E-X10M@12 120 100
E2E-X20M@18 200 120
E2E-X40M@30 380 300
Double distance
model
E2E-X4M@8 80 60
E2E-X8M@12 120 100
E2E-X16M@18 200 120
E2E-X30M@30 350 300
Single distance
model
E2E-X2M@8 80 60
E2E-X5M@12 120 100
E2E-X10M@18 200 110
E2E-X18M@30 300 200
A
B
A
Size Shielded
Part A Part B
Dimension
(mm)
Torque Torque
M8
Shielded 9
4 N·m 10 N·m
Unshielded 3
M12
Shielded 16
6 N·m 15 N·m
Unshielded 9
M18
Shielded 16
15 N·m
60 N·m
(30 N·m
*)
Unshielded 3
M30
Shielded 23
40 N·m 80 N·m
Unshielded 8
Size Shielded
Part A Part B
Dimension
(mm)
Torque Torque
M8
Shielded 9
9 N·m 12 N·m
Unshielded 3
M12 --- --- 30 N·m
M18 --- --- 70 N·m
M30 --- --- 180 N·m (100 N·m *)
Part B Part A Part B Part A
Shielded Models Unshielded Models