Datasheet

E2E/E2EQ NEXT Series
67
XS5 NEXT Series XS5 XS3E2E/E2EQ NEXT Series DC 2-wire E2E/E2EQ NEXT Series DC 3-wire
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. Weight of the standard body-sized model.
Materials
Case
Fluororesin coating
(Base material:
SUS303)
Fluororesin coating (Base material: brass)
Fluororesin coating
(Base material:
SUS303)
Fluororesin coating (Base material: brass)
Sensing
surface
Fluorine resin
Clamping
nuts
Fluororesin coating (Base material: brass)
Toothed
washers
Zinc-plated iron
Cable Vinyl chloride (PVC)
Main IO-Link
functions *2
Operation mode switching between NO and NC, self diagnosis enabling, excessive proximity judgment distance selecting, timer function of
the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating
hours read-out, readout of the sensor internal temperature, and initial reset
IO-Link
Commun
ication
specifica
tions
*2
IO-Link
specificati
on
Ver1.1
Baud rate COM2 (38.4 kbps), COM3 (230.4 kbps)
Data
length
PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
Minimum
cycle time
COM2: 2.3 ms, COM3: 0.4 ms
Accessories Instruction manual, Clamping nuts, Toothed washer
Types Double distance Single distance
Size M8 M12 M18 M30 M8 M12 M18 M30
Item Model E2EQ-X2@8 E2EQ-X4@12 E2EQ-X8@18 E2EQ-X15 @ 30 E2EQ-X1R5@8 E2EQ-X2@12 E2EQ-X5@18 E2EQ-X10 @ 30