Datasheet

35
XS5 NEXT Series XS5 XS3E2E/E2EQ NEXT Series DC 2-wire E2E/E2EQ NEXT Series DC 3-wire
Proximity Sensor
E2E/E2EQ NEXT Series
DC 3-Wire
Enables easier and standardized designs
previously not possible
• The world's longest sensing distance*
1
Nearly double the sensing distance of previous
• With high-brightness LED, the indicator is visible anywhere from 360°.
• Only 10 Seconds*
2
to Replace a Proximity Sensor with the "e-jig"
(Mounting Sleeve).
• Cables with enhanced oil resistance enabled 2-year oil resistance*
3
.
• IP69K compliant for water resistance and wash resistance *
4
• Comes in a wide variation to make sensor selection easy
• UL certification (UL60947-5-2)
*
5
and CSA certification (CSA
C22.2 UL60947-5-2-14)
*1. Based on December 2018 OMRON investigation.
*2. Time required to adjust the distance when installing a Sensor. Based on OMRON investigation.
*3. Refer to
Ratings and Specifications for details. However, E2E Connector Models and E2EQ series is excluded.
*4. E2EQ series is excluded.
*5. M8 (4-pin) Connector Models are not UL certified.
Features
For the most recent information on models that have been
certified for safety standards, refer to your OMRON website.
Be sure to read Safety Precautions on page 81.
*6. Based on December 2018 OMRON investigation.
*7. Quadruple distance models of M12 sized
9mm
Exceptional
sensing
range
*6
*7
*3
Triple distance model
6mm [M12]
Quadruple distance model
9mm [M12]
1
location,
all new E2E Sensors
can be monitored
with IO-Link
degree
view
with high visibility
LED indicator
10
360°
second
replaceable
with e-jig (adaptor)
2
-year
Strong resistance to
cutting oil
PREMIUM Model
[M12]
The PREMIUM Model, which has a longer detection
range compared to previous models, allows for
more spacious designs with less risk of contact. It
also enables you to standardize your designs by
letting you adopt a single one-size model instead of
multiple models of different sizes.
In addition to our HIGH SPEC Models, we
also offer mid/short-distance BASIC
Models, to meet various facility design
requirement specifications.
New standards for usability
*8. Time required to adjust the distance when installing a Sensor. Based on OMRON investigation.
ous facility desi
g
n
ations
.
BASIC Model
Double distance model
4mm [M12]
Single distance model
2mm [M12]
Early error detection
Quick recovery
Less unexpected
facility stoppages
Easy design Standardized design
oil resistance *9
*9. E2E Connector Models and E2EQ series is
excluded.
*8